| Universal Remote Control, Inc . |
6 | In this step you select which code table to use. Thus, you can pro- |
| gram a device named “TV” with codes from the CABLE code tables |
and a device named” VIDEO” with codes from the TV code table.
If you don’t see the code table you need, press the PAGE buttons to reveal the other page of code table categories, then select the code table you want to use.
Note: Each name that appears in the display may include several types of components. For example, the AUX category includes many types of cus- tom installation devices. See page 37 for a list of component types each Code Table contains.
7 | Point the Omega at the component, then enter the first three digit |
| code number from your notes using the numbered buttons. After |
you enter each three digit number, look at the component to see if it turned off.
Use the number buttons to enter the code number.
Continue to enter code numbers until the component turns off.
For Example: I have a Sony TV. I found the code numbers 070, 139,147, 126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered buttons on the Omega, I entered 070 and looked at the TV. It didn’t turn off, so I entered 139, then 147 and so on, until I found the code that pow- ered off the TV.
7