Universal Remote Control omega MX-650 owner manual Universal Remote Control, Inc

	Universal Remote Control, Inc .
3	The display changes to a list of the names of your devices. If you have
	two pages of devices, pressing either of the page buttons will display

the other page. Select the device you would like to change the Emitter settings, then go to Step 4.

Page Button	Select a device
displays the
other page
of devices.

4	Select the new setting by pressing the desired button, then press
	SAVE to save your new setting and return to the RF settings menu.

Displays the current IR line output

Change the IR line output

using UP and DOWN buttons

Save the new setting

Exit this Menu with- out changing the EMITT settings

BLAST - Setting the Front Panel Blaster On or Off

The MRF-250 and MRF-300 Base Stations have a configurable front panel high power IR LED or “blaster” for controlling compo- nents in the same cabinet space without emitters attached to their front panel. The front panel blaster can overpower or saturate the sensors of some A/V components, so if intermittent operation occurs, the blaster should be turned off.

The blaster is incompatible with a stack of identical components, since all components will receive IR commands at once, no mat- ter what device is selected. Turn off the front panel blaster by fol- lowing the steps described on the next page:

35