Universal Remote Control omega MX-650 owner manual Cloning One Omega to Another

PROG Button erases three digit codes, Page, Text and Punch Through settings.

T h e O m e g a

Erasing the Entire Omega

To erase EVERYTHING, press and hold both the MAIN and the STOP buttons for 15 seconds. After 15 seconds, the RESET screen appears. Press the SURE button to erase all of your settings and return to the fac- tory default setup.

ALL Button erases all settings.

Cloning One Omega to Another

If you own two or more Omega, you can copy and transfer all the setup from one Omega to another. Just follow these easy steps:

1	Enter SETUP mode by pressing and holding both MAIN and ENT
	for three seconds.

2

3

Note: You have 30 seconds for each step, otherwise the Omega will time out automatically.

Press the CLONE button.

Align the two Omega head-to-head, about an inch apart.

4	Press the RECV display button on the new Omega you would like
	to setup by cloning.
5	Press the SEND display button on the Omega you previously setup.
6	Press the START button on the new Omega and then press the
	START button on the Omega you previously setup.
	Note: Cloning typically takes about 40 seconds.
	After completion, the cloned Omega will flash “GOOD”.
7	Return to normal operation by pressing the MAIN button twice.

26