Samsung Complete Guide to Connecting Your SEB-1005R Camera with DVRs

CONNECTING THE CAMERA

Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime. The camera is suitable for both internal and external use.

SEB-1005RSEB-1007R

b c

	Name	Description
	Camera Fitting	Groove that is used to fit the camera bracket.
	Groove	There are two grooves; one on the top and one on the bottom.
b	IR LED	These infrared LED's are controlled by the illumination sensor.
c	Lens	Focal length of 3.6mm enables you to cover relatively longer range of monitoring.
	Illumination Sensor	Detects incoming light to control the IR LED.
	DVR Connection	Connect the cable directly to the DVR without using a particular power cable.
	Cable	You can use the RJ-45 cable to connect to a remote camera.

RJ-45 Cable (Length: 18.3m, 60ft)

This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the UTP direct cable (all of 8 pins are used) to extend the length to a max of 200m. (based on UTP CAT 5e)

 CONNECTING WITH OTHER DEVICE

CVBS+

CVBS-

N.C

GND

			1. CVBS+
			2. CVBS-
			3. AUDIO
		12V	4. GND
			5. 12V
			6. N.C
	GND		7. N.C
GND(AUDIO)			8. N.C
12V

<Cable pin information provided>

English _15