Samsung SDE-3003, SDE-3001 Setting the Event, Sensor Detection, Detection, and press Enter button

Page 51

SETTING THE EVENT

You can set recording options for sensor, motion, and video loss event.

Sensor Detection

You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration.

Using the mouse may help make setup easier.

1.Press the [MENU] button on the remote control.

2.Use the left/right button (◄ ►) to select <Event>. Event setting menu is selected.

3.	Use the up/down buttons (	) to move to <Sensor
	Detection>, and press [ENTER] button.
4.	A window of sensor detection setup appears.
4.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Sensor Operation : Sets the operation mode of sensors.

-<OFF> : Sensor does not operate.

-<N.O (Normal Open)> : Sensor is opened. If the sensor is closed, it generates alarm.

-<N.C (Normal Close)> : Sensor is closed.

If the sensor is open by interruption, it generates alarm.

•Cam : Select a channel to be connected to the sensor. If selected camera, “Camera Setup” window appears. Select a channel and setup the preset.

		Logout					Return

Event

Sensor Detection

Motion Detection

Video Loss Detection

Alarm Schedule

Sensor Detection


	Sensor	Sensor Operation 		Cam 	Alarm 	Duration 
	1	OFF		1	None	10 sec	
	2	OFF		2	None	10 sec	
	3	OFF		3	None	10 sec	
	4	OFF		4	None	10 sec	

OK Cancel

Sensor Detection

Sensor	Sensor Operation 		Cam 	Alarm 		Duration 
1	OFF		1	None		10 sec	
2	Camera Setup						
3							
4	OFF	CH 	4	None	CH 	10 sec	
		1			3
		2			4
			OK	Cancel

 USING THE DVR

OK Cancel

•Alarm : Sets the alarm output method.

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 45)

•Duration : Sets the duration of alarm signal and alarm sound.

5.When the sensor detection setup is done, press <OK>.

Sensor Detection


	Sensor		Sensor Operation 		Cam 		Alarm 	Duration 
	1		OFF		1		None	10 sec		
	2		OFF		2		None	10 sec		
	3		Alarm Setup							
	4		OFF		4		None	10 sec		
				1		BEEP		All
					OK		Cancel


					OK		Cancel

English _51

Image 51

Contents Channel DVR Channel DVR  Overview Important Safety InstructionsOverview Before Start BatteryContents SEC Backup Viewer Using Live ViewerUsing Search Viewer Viewer SetupFeatures Standards Approvals Package ContentsPart Names and Functions Front Part Names and Functions Rear Remote Control Using the Numeric buttonsChanging the Remote Control ID Other Device InstallationChecking the Installation Environment  Connecting withConnecting the VIDEO, AUDIO, and Monitor Connecting the USB Only one mouse port is available IR LED Connecting the Camera Connecting with Other Device RJ-45 Cable Length 18.3m, 60ftInstalling the camera Camera Bracket SpecificationCamera Bracket Adjusting the Camera Bracket Connecting the Alarm INPUT/OUTPUT Connecting the alarm input signalConnecting the alarm output signal Connecting the Network Connecting to Network through Ethernet 10/100BaseTConnecting to the Network using the router Internet Connecting to Internet through Adsl Live Getting StartedStarting the system Shutting Down the SystemLocking All Buttons LoginLive Screen Configuration Icons on the Live ScreenLive Live Screen Menu Error InformationSplit Mode Menu Split Mode MenuSingle Mode Menu Alarm Freeze View the Launcher MenuSystem Date/Time/Language Time. PIP Live ModeSwitching the screen mode Switching the screen automaticallySwitching to Single Mode Channel SettingMultichannel Live Menu Selecting a Spot Out modeSpot OUT ZoomEvent Monitoring Audio ON/OFF in Single modeAudio ON/OFF FreezeCH2 System Setup Setting the Date/Time/LanguageDate/Time/Language Using the Calendar Setting HolidayPermission Management Setting the AdministratorUsing Virtual Keyboard Permission ManagementTo set the group authority Setting the GroupTo restrict the user permissions To change the user password Using the DVR Setting the UserSetting Permissions When the user setup is done, press OKSystem Management Checking the System InformationSystem Management Updating the Software  UsingSettings Log InformationSystem Log Select Event Log Use direction buttons Backup LogEvent Log Use the up/down buttonsPress Enter button Setting the DeviceSetting the Camera CameraYou can check information on storage devices When the camera setup is done, press OKStorage Device Confirming DevicesFormatted FormattingYou can format a storage device Select FormatHDD Alarm Remote DevicesRemote Device Move to Monitor, and press Enter button Setting the MonitorSetting Display position MonitorSetting the Screen Mode Setting the Spot OutRecording Schedule Setting the RecordingRecording Schedule RecordRecording Color Tags REC Quality / ResolutionSetting Standard Recording Properties Event Record DurationRecord Option Setting Event Recording PropertiesDetection, and press Enter button Setting the EventWindow of sensor detection setup appears Sensor DetectionMotion Detection Setting the Motion Detection AreaVideo Loss Detection Alarm ScheduleWindow of video loss detection area setup appears When the Alarm Schedule setup is done, press OKBackup BackupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol Network ConfigurationConnection Mode Setting the ConnectionMove to Connection Mode, and press Enter Setting the ProtocolWhen no router is used Connecting and Setting the NetworkInternal Port Range Set the same to the External Port Range When a router is usedDdns Setting Live TransferLive Transfer Mailing Service Smtp SettingEvent Setting Group Setting Recipient SettingWhen the recipient setting is done, press OK You can search for recorded data of a desired time It does not appear in Backup SearchSearch Time SearchBackup Search Event SearchSearch & Play Motion Search Motion Search For data search, refer to Search. Backup RangePlayback PlayDVR set Using the Playback ButtonREC Records all channels in Live mode Partial Backup Mode SwitchWhat is Web Viewer? Introducing WEB Viewer WEB Viewer Click Install Connecting WEB ViewerUsing Live Viewer Full Screen Mode You can change the split mode by clicking each number iconSingle Mode Quad ModeConnected DVR Setting the display of the OSD time informationCapture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PCUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Date/Time/Language Viewer SetupYou can configure the various settings of the DVR system SystemPermission Management HolidaySystem Management Device CameraStorage Device Monitor Remote DeviceEvent Record Duration For more information, refer to Setting the Recording.Record Recording ScheduleSensor Detection REC Quality & ResolutionEvent Record OptionVideo Loss Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Motion DetectionConnection For more information, refer to Network Configuration.You can check the Ddns settings NetworkSmtp Mailing ServiceMobile Viewer What is Mobile Viewer?Key Features AboutRecommended System Requirements SEC Backup Viewer Backup Viewer UTP Product Specification CameraWeight 300g 115g Humidity Mechanical Appendix 500GB Sata HDD 1TB Sata HDD Product SpecificationHdmi Default Setting Category Details Factory DefaultManagement 4CIFL DurationSmtp Troubleshooting 4CIF 2CIFCIF USA Open Source License Report on the ProductPreamble Version 2, JunePage No Warranty How to Apply These Terms to Your New Programs Some devices are designed to deny users access toGNU Lesser General Public License instead of this License Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public LicenseRevised Versions of this License Limitation of Liability Interpretation of Sections 15END of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Chertsey, Surrey, United Kingdom KT16 OPS Sales Network