Samsung 4 CHANNEL DVR, SDE-3003, SDE-3001 Live Screen Configuration, Icons on the Live Screen

Page 23

LIVE SCREEN CONFIGURATION

Icons on the Live Screen

You can check the status or operation of the DVR with the icons on the live screen.

2011-01-01 00:00:01 

LIVE

CAM 01

	Name	Description
	Current Date, Time	Displays the current time and date.
b	Login Information	When you are logged in, the “LOG ON” icon will be displayed.
		Displayed if the zoom function is activated.
		Displayed if you press the Pause button.
c	Screen Mode	Displayed in Auto Sequence mode where all channels are switched at the
c	Screen Mode	specific time interval.
		This icon is displayed if a user with restricted access to the Record button tries
		to make manual recording.

Only the user with the applicable permission can release (stop) the recording. Displayed if the HDD is full and the DVR has an insufficient space to record. Displayed if no HDD is installed or the existing HDD should be replaced.

System Operation						Displayed if the HDD needs a technical examination.


						This will be displayed if the backup operation is in process.
						Displayed if a new firmware is found from the network.


Video Input Status						Displayed if no input is entered in the condition that the camera is set to <ON>.
Video Input Status						Nothing will be displayed on the screen if the camera is set to <OFF>.

Camera Name/ Channel						Displays the camera name and the changed channel, if any.
						Displays the resolution of the recording screen. (Page 49)
						Displays AUDIO ON/MUTE.
						Not displayed in video mode if deactivated.
Camera Operation						If the sensor is set to <ON>, the input signal will be displayed on the screen of
						the connected channel.
						the connected channel.
						Displayed if a motion detected in the condition that the motion detection is set to

						<ON>.
						Displays the current record mode from Record/Event/Schedule.

English _23

Image 23

Contents Channel DVR Channel DVR  Overview Important Safety InstructionsOverview Before Start BatteryContents SEC Backup Viewer Using Live ViewerUsing Search Viewer Viewer SetupFeatures Standards Approvals Package ContentsPart Names and Functions Front Part Names and Functions Rear Changing the Remote Control ID Remote ControlUsing the Numeric buttons Other Device InstallationChecking the Installation Environment  Connecting with Only one mouse port is available Connecting the VIDEO, AUDIO, and MonitorConnecting the USB IR LED Connecting the Camera Connecting with Other Device RJ-45 Cable Length 18.3m, 60ftCamera Bracket Installing the cameraCamera Bracket Specification Adjusting the Camera Bracket Connecting the alarm output signal Connecting the Alarm INPUT/OUTPUTConnecting the alarm input signal Connecting to the Network using the router Connecting the NetworkConnecting to Network through Ethernet 10/100BaseT Internet Connecting to Internet through Adsl Live Getting StartedStarting the system Shutting Down the SystemLocking All Buttons LoginLive Live Screen ConfigurationIcons on the Live Screen Live Screen Menu Error InformationSplit Mode Menu Split Mode MenuSingle Mode Menu System Date/Time/Language Time. Alarm FreezeView the Launcher Menu PIP Live ModeSwitching the screen mode Switching the screen automaticallySwitching to Single Mode Channel SettingMultichannel Live Menu Selecting a Spot Out modeSpot OUT ZoomEvent Monitoring Audio ON/OFF in Single modeAudio ON/OFF FreezeCH2 Date/Time/Language System SetupSetting the Date/Time/Language Using the Calendar Setting HolidayPermission Management Setting the AdministratorUsing Virtual Keyboard Permission ManagementTo set the group authority Setting the GroupTo restrict the user permissions To change the user password Using the DVR Setting the UserSetting Permissions When the user setup is done, press OKSystem Management System ManagementChecking the System Information Updating the Software  UsingSystem Log SettingsLog Information Select Event Log Use direction buttons Backup LogEvent Log Use the up/down buttonsPress Enter button Setting the DeviceSetting the Camera CameraYou can check information on storage devices When the camera setup is done, press OKStorage Device Confirming DevicesFormatted FormattingYou can format a storage device Select FormatRemote Device HDD AlarmRemote Devices Move to Monitor, and press Enter button Setting the MonitorSetting Display position MonitorSetting the Screen Mode Setting the Spot OutRecording Schedule Setting the RecordingRecording Schedule RecordRecording Color Tags REC Quality / ResolutionSetting Standard Recording Properties Event Record DurationRecord Option Setting Event Recording PropertiesDetection, and press Enter button Setting the EventWindow of sensor detection setup appears Sensor DetectionMotion Detection Setting the Motion Detection AreaVideo Loss Detection Alarm ScheduleWindow of video loss detection area setup appears When the Alarm Schedule setup is done, press OKBackup BackupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol Network ConfigurationConnection Mode Setting the ConnectionMove to Connection Mode, and press Enter Setting the ProtocolWhen no router is used Connecting and Setting the NetworkInternal Port Range Set the same to the External Port Range When a router is usedLive Transfer Ddns SettingLive Transfer Event Setting Mailing ServiceSmtp Setting When the recipient setting is done, press OK Group SettingRecipient Setting You can search for recorded data of a desired time It does not appear in Backup SearchSearch Time SearchSearch & Play Backup SearchEvent Search Motion Search Motion Search For data search, refer to Search. Backup RangePlayback PlayDVR set Using the Playback ButtonREC Records all channels in Live mode Partial Backup Mode Switch WEB Viewer What is Web Viewer?Introducing WEB Viewer Click Install Connecting WEB ViewerUsing Live Viewer Full Screen Mode You can change the split mode by clicking each number iconSingle Mode Quad ModeConnected DVR Setting the display of the OSD time informationCapture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PCUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Date/Time/Language Viewer SetupYou can configure the various settings of the DVR system SystemPermission Management HolidaySystem Management Storage Device DeviceCamera Monitor Remote DeviceEvent Record Duration For more information, refer to Setting the Recording.Record Recording ScheduleSensor Detection REC Quality & ResolutionEvent Record OptionVideo Loss Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Motion DetectionConnection For more information, refer to Network Configuration.You can check the Ddns settings NetworkSmtp Mailing ServiceMobile Viewer What is Mobile Viewer?Key Features AboutRecommended System Requirements SEC Backup Viewer Backup Viewer UTP Product Specification Camera Appendix Weight 300g 115gHumidity Mechanical 500GB Sata HDD 1TB Sata HDD Product SpecificationHdmi Management Default SettingCategory Details Factory Default 4CIFL DurationSmtp Troubleshooting 4CIF 2CIFCIF USA Open Source License Report on the ProductPreamble Version 2, JunePage No Warranty GNU Lesser General Public License instead of this License How to Apply These Terms to Your New ProgramsSome devices are designed to deny users access to Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesRevised Versions of this License PatentsUse with the GNU Affero General Public License END of Terms and Conditions Limitation of LiabilityInterpretation of Sections 15 Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Chertsey, Surrey, United Kingdom KT16 OPS Sales Network