Samsung SDE-3003, SDE-3001 user manual Connecting and Setting the Network, When no router is used

Connecting and Setting the Network

Networking may differ from the connection method, check your environment before setting the connection mode.

When no router is used

•	Static IP mode
-	Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the
	DVR and remote user.					
-	DVR Network Settings : Set the <Connection Mode> in	Connection Mode				USING
	<Connection> menu of the connected DVR to <Static IP>.	Connection	Protocol
	 Consult your network manager for IP, Gateway and Subnet Mask.	 Connection Mode	Static IP			THE
		 Bandwidth	2Mbps
•	Dynamic IP (DHCP) mode	 IP	192.168. 1.200			DVR
		 Gateway	192.168. 1.	1
-		 Subnet Mask	255.255.255. 0
	Internet connection : Connect the DVR directly to a cable	 DNS	Manual		168.126. 63.	1
	modem, DHCP ADSL modem or FTTH network.
-	DVR Network Settings : Set the <Connection Mode> in		OK		Cancel
	<Connection> menu of the connected DVR to <Dynamic
	IP>.

•ADSL (PPPoE: ID and password certification)

-Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection requires user ID and password.

-DVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected DVR to <ADSL>.

ADSL <User ID> and <Password> should be the same to the ADSL user information.

If you don’t know the ID and password, consult your ADSL service provider.

Connection Mode
Connection	Protocol
 Connection Mode	ADSL
 Bandwidth	600kbps
 IP	192.168. 1.200
 Gateway	192.168. 1.	1
 Subnet Mask	255.255.255. 0
 DNS	Manual	168.126. 63.	1
 User ID	ID
 Password	************
	OK	Cancel

English _57