Samsung SDE-3003, SDE-3001 Using the Numeric buttons, Changing the Remote Control ID

overview

REMOTE CONTROL

SEARCH

Displays the search menu.

MODE

Changes the screen mode.

POWER

Displays the Exit pop up screen.

NUMBER [0~+10]

Used as the numeric input keys, or displays a single channel.

Skip Backward (by unit time),

Slow Rewind, Slow Forward,

Skip Forward (by unit time)

T/W

Zooms in or out.

MENU

Goes to the system menu screen.

Up/Down/Left/Right(▲▼◄ ►)/ENTER

Moves the cursor up/down/left/right, and runs the Select Menu.

FREEZE

Freezes the screen temporarily.

ZOOM

Runs the digital zoom (x2) function.

BACKUP

Displays the Backup Menu.

DVR

Activates the DVR function.

ID

Sets the ID of the system.

Select 2 digits from 0 ~ 9 while pressing the ID Key.

Move Frame

While paused, moves to the previous/next frame.

FR, STOP, PLAY/PAUSE, FF

SCROLL ,.

Moves the menu scroll.

RETURN

Returns to the previous screen.

AUDIO

Turns Audio on/off.

ALARM

Cancels the Alarm.

REC

Starts or ends the live recording.

REC LOCK

Selects the recording lock function.

PIP

Selects or deselects the PIP function.

EP10-000522

Using the Numeric buttons

1.Press any button among 1 to 4.

2.Move to the selected channel number.

Changing the Remote Control ID

1.Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00.

2.Enter 2 digits of your selection in order, while pressing the system [ID] button.

3.When ID input is done, press the system [ID] button again to check the setting.

M If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed. Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 45)

12_ overview