Samsung SDE-3003, SDE-3001, 4 CHANNEL DVR user manual Remote Devices, HDD Alarm

Page 45

HDD Alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Storage Device>, and press [ENTER] button.

2.Select <HDD Alarm>.

A window for setting HDD check and replace output ports and their durations appears.

3. Use direction buttons (	) to move to the desired
item.

•Alarm

-Alarm signal will output through the alarm out port on the rear side when selected <1>.

-If <BEEP> was selected, a beep will sound.

Storage Device
Device	Format		HDD Alarm
 Check Alarm Output Port		1	BEEP
		All
 Duration		OFF		
				
 Replace Alarm Output Port		1	BEEP	USING
		All
 Duration		OFF

		OK	Cancel	THE DVR
				THE DVR

- If <All> was selected, both beep sound and alarm signal through rear side ports will output.

•Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

•Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port.

•Duration : Sets the alarm duration for the alarm signal and beep sound.

M <Check> status means that the HDD is operating but it has problems that require technical examination.

( ) appears on the Live screen.

<Replace> status means that the HDD has defect and requires immediate replacement.

( ) appears on the Live screen.

4.When the HDD Alarm setup is done, press <OK>.

Remote Devices

Specify the use of remote control and the remote control ID so that you can synchronize with the DVR.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Remote Device>, and press [ENTER] button.

2.Make sure to match IDs of the DVR, Remote Control and press <OK>.

M For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 12)

Remote Device

Remote Control

ON

ID 00

OK Cancel

English _45

Image 45

Contents Channel DVR Channel DVR  Overview Important Safety InstructionsOverview Before Start BatteryContents Using Search Viewer Using Live ViewerViewer Setup SEC Backup ViewerFeatures Standards Approvals Package ContentsPart Names and Functions Front Part Names and Functions Rear Remote Control Using the Numeric buttonsChanging the Remote Control ID Checking the Installation Environment Installation Connecting with Other DeviceConnecting the VIDEO, AUDIO, and Monitor Connecting the USB Only one mouse port is available  Connecting with Other Device Connecting the CameraRJ-45 Cable Length 18.3m, 60ft IR LEDInstalling the camera Camera Bracket SpecificationCamera Bracket Adjusting the Camera Bracket Connecting the Alarm INPUT/OUTPUT Connecting the alarm input signalConnecting the alarm output signal Connecting the Network Connecting to Network through Ethernet 10/100BaseTConnecting to the Network using the router Internet Connecting to Internet through AdslStarting the system Getting StartedShutting Down the System  LiveLocking All Buttons LoginLive Screen Configuration Icons on the Live ScreenLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu Alarm Freeze View the Launcher MenuSystem Date/Time/Language Time. Switching the screen mode Live ModeSwitching the screen automatically PIPSwitching to Single Mode Channel SettingSpot OUT Selecting a Spot Out modeZoom Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeFreeze Event MonitoringCH2 System Setup Setting the Date/Time/LanguageDate/Time/Language Using the Calendar Setting HolidayUsing Virtual Keyboard Setting the AdministratorPermission Management Permission ManagementTo set the group authority Setting the GroupTo restrict the user permissions To change the user passwordSetting Permissions Setting the UserWhen the user setup is done, press OK  Using the DVRSystem Management Checking the System InformationSystem Management Updating the Software  UsingSettings Log InformationSystem Log Event Log Backup LogUse the up/down buttons Select Event Log Use direction buttonsSetting the Camera Setting the DeviceCamera Press Enter buttonStorage Device When the camera setup is done, press OKConfirming Devices You can check information on storage devicesYou can format a storage device FormattingSelect Format FormattedHDD Alarm Remote DevicesRemote Device Setting Display position Setting the MonitorMonitor Move to Monitor, and press Enter buttonSetting the Screen Mode Setting the Spot OutRecording Schedule Setting the RecordingRecord Recording ScheduleSetting Standard Recording Properties REC Quality / ResolutionEvent Record Duration Recording Color TagsRecord Option Setting Event Recording PropertiesWindow of sensor detection setup appears Setting the EventSensor Detection Detection, and press Enter buttonMotion Detection Setting the Motion Detection AreaWindow of video loss detection area setup appears Alarm ScheduleWhen the Alarm Schedule setup is done, press OK Video Loss DetectionSetting the Backup BackupYou can backup the desired data to a connected device BackupConnection Mode Network ConfigurationSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolWhen no router is used Connecting and Setting the NetworkInternal Port Range Set the same to the External Port Range When a router is usedDdns Setting Live TransferLive Transfer Mailing Service Smtp SettingEvent Setting Group Setting Recipient SettingWhen the recipient setting is done, press OK Search It does not appear in Backup SearchTime Search You can search for recorded data of a desired timeBackup Search Event SearchSearch & Play Motion Search Motion SearchPlayback Backup RangePlay  For data search, refer to Search.REC Records all channels in Live mode Partial Backup Using the Playback ButtonMode Switch DVR setWhat is Web Viewer? Introducing WEB Viewer WEB Viewer Click Install Connecting WEB ViewerUsing Live Viewer Single Mode You can change the split mode by clicking each number iconQuad Mode Full Screen ModeConnected DVR Setting the display of the OSD time informationCapture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PCUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar You can configure the various settings of the DVR system Viewer SetupSystem Date/Time/LanguagePermission Management HolidaySystem Management Device CameraStorage Device Monitor Remote DeviceRecord For more information, refer to Setting the Recording.Recording Schedule Event Record DurationEvent REC Quality & ResolutionRecord Option Sensor DetectionYou can set the alarm output time if a video loss occurs Alarm ScheduleMotion Detection Video Loss DetectionYou can check the Ddns settings For more information, refer to Network Configuration.Network ConnectionSmtp Mailing ServiceKey Features What is Mobile Viewer?About Mobile ViewerRecommended System Requirements SEC Backup Viewer Backup Viewer UTP Product Specification CameraWeight 300g 115g Humidity Mechanical Appendix 500GB Sata HDD 1TB Sata HDD Product SpecificationHdmi Default Setting Category Details Factory DefaultManagement 4CIFL DurationSmtp Troubleshooting 4CIF 2CIFCIF Preamble Open Source License Report on the ProductVersion 2, June USAPage No Warranty How to Apply These Terms to Your New Programs Some devices are designed to deny users access toGNU Lesser General Public License instead of this License Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public LicenseRevised Versions of this License Limitation of Liability Interpretation of Sections 15END of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Chertsey, Surrey, United Kingdom KT16 OPS Sales Network