Samsung SDE-3001 You can change the split mode by clicking each number icon, Single Mode

Page 70

web viewer

OSD INFORMATION DISPLAY

The channel number, video size, and IP address of the connected DVR are displayed.

bThe current date and time will be displayed according to the selected time information display setting <DVR Time> or <PC Time>.

cAlarm icon appears when alarm is issued.

It disappears when pressed the [ALARM] button of the DVR. Motion icon appears when motion is detected.

It disappears when pressed the [ALARM] button of the DVR.

SPLIT-SCREEN

You can change the split mode by clicking each number icon.

SINGLE MODE	QUAD MODE
• Click < > button.

The screen displays the selected camera connected to the DVR in

“SINGLE MODE”.

• Click < > button.

The screen displays the selected camera connected to the DVR in

“QUAD MODE”.

• Click < > button.

The screen displays the selected camera connected to the DVR in

“FULL SCREEN MODE”.

Double clicking on the screen or pressing any button of the keyboard

returns to the previous mode.

70_ web viewer

Image 70

Contents Channel DVR Channel DVR Important Safety Instructions  OverviewOverview Battery Before StartContents Viewer Setup Using Live ViewerUsing Search Viewer SEC Backup ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Using the Numeric buttons Remote ControlChanging the Remote Control ID  Connecting with InstallationChecking the Installation Environment Other DeviceConnecting the USB Connecting the VIDEO, AUDIO, and Monitor Only one mouse port is available RJ-45 Cable Length 18.3m, 60ft Connecting the Camera Connecting with Other Device IR LEDCamera Bracket Specification Installing the cameraCamera Bracket Adjusting the Camera Bracket Connecting the alarm input signal Connecting the Alarm INPUT/OUTPUTConnecting the alarm output signal Connecting to Network through Ethernet 10/100BaseT Connecting the NetworkConnecting to the Network using the router Connecting to Internet through Adsl InternetShutting Down the System Getting StartedStarting the system  LiveLogin Locking All ButtonsIcons on the Live Screen Live Screen ConfigurationLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu View the Launcher Menu Alarm FreezeSystem Date/Time/Language Time. Switching the screen automatically Live ModeSwitching the screen mode PIPChannel Setting Switching to Single ModeZoom Selecting a Spot Out modeSpot OUT Multichannel Live MenuFreeze Audio ON/OFF in Single modeAudio ON/OFF Event MonitoringCH2 Setting the Date/Time/Language System SetupDate/Time/Language Setting Holiday Using the CalendarPermission Management Setting the AdministratorUsing Virtual Keyboard Permission ManagementSetting the Group To set the group authorityTo change the user password To restrict the user permissionsWhen the user setup is done, press OK Setting the UserSetting Permissions  Using the DVRChecking the System Information System ManagementSystem Management  Using Updating the SoftwareLog Information SettingsSystem Log Use the up/down buttons Backup LogEvent Log Select Event Log Use direction buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonConfirming Devices When the camera setup is done, press OKStorage Device You can check information on storage devicesSelect Format FormattingYou can format a storage device FormattedRemote Devices HDD AlarmRemote Device Monitor Setting the MonitorSetting Display position Move to Monitor, and press Enter buttonSetting the Spot Out Setting the Screen ModeRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsSetting Event Recording Properties Record OptionSensor Detection Setting the EventWindow of sensor detection setup appears Detection, and press Enter buttonSetting the Motion Detection Area Motion DetectionWhen the Alarm Schedule setup is done, press OK Alarm ScheduleWindow of video loss detection area setup appears Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press EnterConnecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingWhen the recipient setting is done, press OK Time Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeEvent Search Backup SearchSearch & Play Motion Search Motion SearchPlay Backup RangePlayback  For data search, refer to Search.Mode Switch Using the Playback ButtonREC Records all channels in Live mode Partial Backup DVR setIntroducing WEB Viewer What is Web Viewer? WEB Viewer Connecting WEB Viewer Click InstallUsing Live Viewer Quad Mode You can change the split mode by clicking each number iconSingle Mode Full Screen ModeSetting the display of the OSD time information Connected DVRSaving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can configure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Camera DeviceStorage Device Remote Device MonitorRecording Schedule For more information, refer to Setting the Recording.Record Event Record DurationRecord Option REC Quality & ResolutionEvent Sensor DetectionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionNetwork For more information, refer to Network Configuration.You can check the Ddns settings ConnectionMailing Service SmtpAbout What is Mobile Viewer?Key Features Mobile ViewerSEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification Camera UTPHumidity Mechanical Weight 300g 115g Appendix Product Specification 500GB Sata HDD 1TB Sata HDDHdmi Category Details Factory Default Default SettingManagement Duration 4CIFLSmtp Troubleshooting 4CIF 2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty Some devices are designed to deny users access to How to Apply These Terms to Your New ProgramsGNU Lesser General Public License instead of this License Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsUse with the GNU Affero General Public License PatentsRevised Versions of this License Interpretation of Sections 15 Limitation of LiabilityEND of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS