Sunwave Tech manual Identifying Components, Top of SRC-7000

Page 10

SRC-7000 User’s Manual

1.5 Identifying Components

Please refer to the following illustrations to identify the components of SRC-7000. This section provides you an overview of the SRC- 7000. For the detailed description on operation, please refer to Chapter 3.

1.5.1 Top of SRC-7000

Figure 1-3: Front view

1.Light sensor (P.54)

The Light Sensor will detect the ambient brightness to control the backlight whether turn on or not.

2.Touch screen LCD (P.12)

The LCD screen enables you to configure and control your devices by tapping the screen. In addition, you can tap the screen to power on SRC-7000.

3.Hard key (P.10)

You can operate the most frequently used functions by pressing these hard keys.

4.Transmission port (P.71)

With the port, you can connect your PC to the SRC-7000 with the SLC-2080 USB cable to upgrade the MCU firmware or edit the SRC-7000.

8

Image 10

Contents User’s Manual 041201Copyright PrefaceAbout this manual TrademarksTable of Contents Macro Timer Macro Pre-code LearningInstall the SLC-2080 USB Driver Introduction to the SRC-7000 SRC-7000 Features Unpacking the SRC-7000Battery Installation Remove battery coverBattery Precautions Turning the Touch Screen OnIdentifying Components Top of SRC-7000Botton of SRC-7000 Direct Access Buttons Rubber Keys Setup mode function Device normal functionPrecautions When Using the Touch Screen LCD Touch ScreenTouch Screen Keys Touch screen buttonsMain Menu Basic Information Layout Key Layout Setup Mode Code Setting Setup ModeTimer Macro Setup Mode Quick Start Re-calibrating the ScreenDate / Time Setting Device Setting SRC-7000 User’s Manual Add a Device How to Set Up Your SRC-7000Create a New Device Next row How to Set Up Your SRC-7000 Load the Codes for the Newly-added DeviceSRC-7000 User’s Manual Learning SRC-7000 User’s Manual Add a Soft Key SRC-7000 User’s Manual Adding Text Re-label a Device, Key or Text How to Set Up Your SRC-7000 Re-size a Device, Key or Text Delete a Device, Key or Text SRC-7000 User’s Manual Pre-programmed Code SRC-7000 User’s Manual Learning SRC-7000 User’s Manual Learning successfully Learning fail Learn a Cycle Key Delete Device / Key Codes Create a Macro MacroIf you intend to create another Macro key, please repeat ~5 An Example of setting a Macro Basic Device Required Macro Sequence OperationTimer Macro Create a Timer MacroSRC-7000 User’s Manual Delete Your Timer Macro Re-label Your Timer Macro View Your Timer Macro Set Up Your Favorite Channels Add Favorite Channel KeysSet Your Favorite Channels as Macros NopSet Up the Remote MenusContrast PowerTime DateLight Sensitivity LCD OffLight Period Reset MotionKey Layout Code Setting Timer Macro ViewDuplicate DuplicateSRC-7000 User’s Manual Install the SLC-2080 USB Driver Install USB Cable and SoftwareIntroduce SLC-2080 USB Cable SRC-7000 User’s Manual Install Upgrade Tools SRC-7000 User’s Manual Install USB Cable and Software Upgrade Vmcu Firmware and Vmcf Pre- programmed Codes From Internet Backup RemoteFrom File SRC-7000 User’s Manual Features Appendix aSpecifications CD, AUXSLC-2080 USB Cable Transmit Cable Optional AccessoriesAppendix B SDS-7000 SDS-7000 Docking StationTroubleshooting Tables Appendix CTrying to configure