Sunwave Tech SRC-7000 manual Motion, Reset

Page 57

Chapter 4 Menus

The Motion Detector will sense any movement and turn on the Display automatically. Use this function to change the sensitivity of the Motion detector (Off/Slow/Medium/Fast).

1.

Use

or

to change the sensitivity of

the Motion

Motion

Detector.

 

 

 

 

 

2.

The more sensitive (eg: Fast), the more easily the SRC-

 

7000 will turn on its LCD.

 

 

3.

You can use this function to conserve battery power (a faster

 

setting will decrease amounts of accidental activation).

4.

Press

 

 

to save your settings or press

 

 

to exit

 

 

 

 

without saving any changes.

There will be a welcome page when you use the SRC-7000 for the first time or reset it.

Welcome Page 1. Use or to turn the welcome page feature on or off (Enable/Disable).

2.Press to save your settings or press to exit without saving any changes.

Use “Calibrate” to adjust the accuracy of the LCD when the SRC-7000 touch screen is not as responsive as usual.

Calibrate 1. When you are calibrating the LCD, tap where the “X” appears (Please refer to Chapter 2.1 P.17 for detailed information).

 

2.

Press

 

 

to exit without saving any changes.

 

 

 

 

 

 

 

1.

If you want to reset your SRC-7000, please use this function

Reset

 

to erase all of your settings on your remote.

2.

After

you select this function, a message will appear to

confirm your decision, if you still want to reset your remote, tap “Yes”. This will reset the SRC-7000 back to the factory defaults.

55

Image 57
Contents 041201 User’s ManualAbout this manual PrefaceCopyright TrademarksTable of Contents Pre-code Learning Macro Timer MacroInstall the SLC-2080 USB Driver Introduction to the SRC-7000 Unpacking the SRC-7000 SRC-7000 FeaturesRemove battery cover Battery InstallationTurning the Touch Screen On Battery PrecautionsTop of SRC-7000 Identifying ComponentsBotton of SRC-7000 Setup mode function Device normal function Direct Access Buttons Rubber KeysLCD Touch Screen Precautions When Using the Touch ScreenTouch screen buttons Touch Screen KeysMain Menu Basic Information Layout Code Setting Setup Mode Key Layout Setup ModeTimer Macro Setup Mode Re-calibrating the Screen Quick StartDate / Time Setting Device Setting SRC-7000 User’s Manual How to Set Up Your SRC-7000 Add a DeviceCreate a New Device Next row Load the Codes for the Newly-added Device How to Set Up Your SRC-7000SRC-7000 User’s Manual Learning SRC-7000 User’s Manual Add a Soft Key SRC-7000 User’s Manual Adding Text Re-label a Device, Key or Text How to Set Up Your SRC-7000 Re-size a Device, Key or Text Delete a Device, Key or Text SRC-7000 User’s Manual Pre-programmed Code SRC-7000 User’s Manual Learning SRC-7000 User’s Manual Learning successfully Learning fail Learn a Cycle Key Delete Device / Key Codes Macro Create a MacroIf you intend to create another Macro key, please repeat ~5 Basic Device Required Macro Sequence Operation An Example of setting a MacroCreate a Timer Macro Timer MacroSRC-7000 User’s Manual Delete Your Timer Macro Re-label Your Timer Macro View Your Timer Macro Add Favorite Channel Keys Set Up Your Favorite ChannelsNop Set Your Favorite Channels as MacrosMenus Set Up the RemoteTime PowerContrast DateLCD Off Light SensitivityLight Period Motion ResetKey Layout Code Setting View Timer MacroDuplicate DuplicateSRC-7000 User’s Manual Install USB Cable and Software Install the SLC-2080 USB DriverIntroduce SLC-2080 USB Cable SRC-7000 User’s Manual Install Upgrade Tools SRC-7000 User’s Manual Install USB Cable and Software Upgrade Vmcu Firmware and Vmcf Pre- programmed Codes Backup Remote From InternetFrom File SRC-7000 User’s Manual Appendix a FeaturesCD, AUX SpecificationsAppendix B Optional AccessoriesSLC-2080 USB Cable Transmit Cable SDS-7000 SDS-7000 Docking StationAppendix C Troubleshooting TablesTrying to configure