SRC-7000 User’s Manual
4.Select any key in devices for the commands to use for the Macro. You can save up to 60 commands in one Macro.
5.Select the operation processes between any devices.
6.Select the commands to use.
a.You can press the icon 
to set up the delay between two commands from 0 ~30 seconds.
b.You can press the icon 
to go back to the former command you selected.
Press the 
button to confirm the Macro processes setting.
7. | 8. | 9. |
7.Then decide if you will set a Timer for the Timer Macro.
If you select “No”, you can confirm and exit the Macro setup commands. You can repeat the steps
8.If you select “Yes”,
You can press the 
soft key to set the delay time, which
is achieved by pressing the 
and 
buttons to set the
hour, or press the 
and 
buttons to change the items. 
Tap the date
Or choose the weekday to set the activation time for the Macro function; the section you choose will be in black.
9.Press the 
button to confirm the settings for the Timer Macro.
10.If you intend to setup another Timer Macro, please repeat 3~9.
If a Timer Macro has been set, a small mark 
will be shown beside the Macro key
If the Macro has been set, this symbol will been shown next to the Macro key.
If the Timer has been set, this symbol will been shown next to the Macro key.
46