Sunwave Tech SRC-7000 manual Add a Soft Key

Chapter 3 How to Set Up Your SRC-7000

Learning successfully Learning fail

4.5.

4.Press the corresponding key on your original remote for about 2-3

seconds until the symbol shows up on the LCD to make sure the SRC-7000 has learnt the code.

5.If the symbol shows up, it means that the SRC-7000 has failed to learn the remote codes. If the SRC-7000 fails to copy the remote code, please repeat step 3 again.

6.Press the button when you have finished learning all keys.

The preset layout for your device may not match your original remote completely. Please use “Add Key” (P. 27), “Re-label” (P.30) or “Delete” (P. 33) functions to adjust the layout.

3.2 Add a Soft Key

With this function, you are able to create new soft keys for your devices. There are two main stages for you to add a soft key successfully. The first one is to create a new soft key in your target device. The second one is to load the specific code for your newly-added soft key.

1. 2. 3.

27