Sunwave Tech manual Botton of SRC-7000

Chapter 1 Introduction to the SRC-7000

1.5.2 Botton of SRC-7000

Figure 1-4: Rear view

1.IR port

This needs to be pointed to the IR receiver of the targeted device.

2.Reset switch

You can reset the SRC-7000 when the SRC-7000 does not work properly or hangs up (freezes).

3.Rear label

The rear label marks the model number and the brief specifications.

4.Buzzer opening

Beep tone signals are transmitted through here.

5.Battery compartment

Contains the 3xAAA Alkaline batteries or Ni-MH rechargeable batteries.

6.Learning eye (P.37)

The SRC-7000 learns the IR codes from the original device through this learning eye. Simply point the original device to SRC-7000this learning eye 2~4 inch apart and press corresponded key on the original device, and save the corresponding code into the SRC- 7000.

In this way, SRC-7000 will learn the IR codes from your original device.

9