Mitsubishi Electronics WD-52825 DTV Connectors and Adaptors, DTV Receiver with Component Video

DTV Connectors and Adaptors

Figure 11

The TV back panel has 5 RCA-type connectors for the Input-DTV. The back panel of your external DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver. These adaptors should be available at most electronic supply stores.

on the DTV receiver to Input-DTV on the TV back panel, matching the correct connections:

DTV Receiver to TV Back panel

•Y to Y

•Pr to Pr

•Pb to Pb

4.Connect the L (left) and R (right) audio cables from the DTV receiver to Input-DTV AUDIO on the TV back panel.

Note: To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital A/V receiver.

Figure 11. DTV Connectors and Adaptors

IMPORTANT

See Appendix B for component video signal compatibility information.

For digital audio connections, see your DTV Receiver and A/V receiver Owner’s Guides.

DTV Receiver with Component Video

Figure 12

A coaxial splitter, RCA component video cables and audio cables are required. These are not included with the TV.

Incoming Antenna or Cable

2.

2.

TV back panel

AUDIO

R L(MONO)

INPUT-DTV

YPbPr / RGB HV

(480i/480p/720p/1080i)

4.

DTV Receiver (with YPrPb connections)

or

1.

to antenna, 1. cable or satellite

Figure 12. Connecting an External DTV Receiver with Component Video Connections