Mitsubishi Electronics WD-52825, WD-62825 manual Setting Descriptions Video, Video Settings

A/V Setting Descriptions: Video

Video Settings

◊ Contrast

Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant. In most home lighting situations, a medium contrast looks best. High contrast is good for brightly lit environments.

◊ Brightness

Provides a slider to adjust the overall brightness of the picture.

detect and apply film decoding correction for signals that originated on 24 frames per second film cameras and then were converted for broadcast to 30 frames per second video.

When the original signals originated on 30 frames per second video cameras, the On setting will automatically apply video decoding, the same as used with the Off setting. Try the Off setting when the TV seems to have difficulties and adds too many jagged edges to the images.

Film Mode is not effective for progressive scan (480p) devices, and high definition signals.

◊ Sharpness

Provides a slider to adjust the detail and clarity.

◊ Color

Provides a slider to adjust the color intensity.

◊ Tint

Provides a slider to adjust the proportion of red to green.

◊Color Temp (Color Temperature)

Allows you to adjust how images are displayed. Your choices are:

•Low 6500K or Low (for DTV): White images will have a warm cast to them. This adjustment is an average and can vary due to ambient room lighting, video scene brightness and the TV’s age. The Low 6500K represents the 6500K industry standard for NTSC (non-DTV) pictures.

•Medium: White images will be balanced between the Low (warm) and High (cool) settings.

•High: White images will have a cool cast to them. This setting may provide the most realistic picture under bright lighting.

◊ DefinEdge

Selected image outlines are emphasized, resulting in sharper images, when On. When Off, the edge enhancer functions are prevented. The default is On.

NOTE: A slider will display on-screen for most settings. When the slider is displayed it has a numeric value, where 63 is the maximum, 31 is the mid-point and 0 is the minimum.

For a Currently Viewed PC

◊ Auto Position

Press ENTER to automatically center the position of the PC video. This can be used whether the PC video is on the main or PIP/POP screen.

◊HorizPosition (Horizontal Position)

Manually adjust the horizontal position of the PC, either on the main or PIP/POP screen. This sele ction will override the Auto Position selection.

◊VertPosition (Vertical Position)

Manually adjust the vertical position of the PC, either on the main or PIP/POP screen. This selection will override the Auto Position selection.

◊ Video Noise

Use to reduce minor noise (graininess) in the broadcast received on Ant-1 and Ant-2 or Inputs 1-3, Component 1 and 2 and Input-DTV. Use standard with good quality signals.

◊ Film Mode (Auto) - On or Off

On is the automatic setting and will automatically

◊ Fine Detail

Manually adjust the picture quality of the PC, either on the main or PIP/POP screen. This selection will override the Auto Position selection.

◊ PC Contrast

Manually adjust the picture contrast of the PC when it is the PIP or POP.

78