Mitsubishi Electronics WD-52825 Using the Device Menu Button to Display Menus, CableCARD Menu

Using the Device Menu Button to Display Menus

Device Menu

If NetCommand is setup, pressing the remote control’s DEVICE MENU button displays the transport menu

of the current device if the input is a VCR or DVD. Another press of the DEVICE MENU button will display menu for the current device source, if available.

Figure 9. Transport menu

IR Controlled Devices

For a NetCommand compatible traditional IR controlled device, pressing DEVICE MENU once or twice will display the menu for that device. While the menu for the device is displayed, press ADJUST

, , or and ENTER to navigate the screen. For some NetCommand traditional devices you will also be able to use the number buttons and other additional buttons on the TV remote.

For traditional DVD players, DEVICE MENU is also known as the setup menu.

CableCARD™ Menu

Figure 10

When using a CableCARD, pressing DEVICE MENU will display a list of up to 8 links to applications that contain basic CableCARD information made available from your cable provider. Press ADJUST or to move through the application links. To select a link (blue text) to an application, press ADJUST or

to highlight the link, then press ENTER to access the linked page. Pressing DEVICE MENU will return to the CableCARD menu screen and pressing HOME will return to TV viewing.

If there are technical problems with the CableCARD, an error screen will automatically display with information that may be needed by your Cable provider when you call them for assistance.The screen shown below is an example of the type of screen that may display. Specific screen menus are sent by your cable provider.

Moving Through Other CableCARD Screens

In addition to CableCARD menus, other CableCARD application screens may display and require you to make additional selections. While CableCARD application screens are customized in each area, some general rules apply in using these screens on your Mitsubishi television.

1.Blue text denotes a link to another screen. Press ENTER to move to the next application. When screens do not have blue text, there are no more links.

2.You cannot move backward through the links. If you want to exit the CableCARD system, press HOME to exit and return to TV viewing. CANCEL may not work with some CableCARD screens.

All information on these application screens is provided by your local cable company. Please contact your cable provider if you have any problems with the application screen displays.

IMPORTANT

Most CableCARD screens are status or diagnostic in nature and do not allow you to make changes. These screens are meaningful only to your local cable provider.

Press HOME key to exit

Figure 10. Possible Device Menu for CableCARD

54