Installing the Batteries
Your ONE FOR ALL needs 2 new “AA/LR6” alkaline batteries.
1Remove the battery cover from the back of your ONE FOR ALL by
pressing down on the tab.
2Match the batteries to the + and - marks inside the battery case, then insert the batteries.
3Press the battery cover back into place.
Important notes:
-In order to avoid having to reprogram your ONE FOR ALL after you remove the batteries, you will need to insert new batteries within 5 minutes. Also it is best that you do not use rechargable batteries.
-On the inside of the battery compartment door you will find a label on which to write your
The Keypad
See picture of ONE FOR ALL TV remote on page 3
1LED
2
3
The LED (Light Emitting Diode) flashes red to show the remote is working.
MAGIC Key
The MAGIC key is used to set up your ONE FOR ALL.
MENU Key
The MENU key controls the same function as it did on your original remote.
4POWER Key
5
6
7
The Power key controls the same function as it did on your original remote.
Device Key
Pressing the TV key allows the remote to control the functions of your Television.
Number Keys
The Number keys
Programme (Channel) +/- Keys
These keys operate in the same way as the keys on your original remote. If available on your original remote, these keys will allow you to navigate through the menu.
WWW. ONEFORALL.COM | 4 |