Eiki EIP-3000N owner manual Operating with the Remote Control, Auto Sync Auto Sync Adjustment

Operating with the Remote Control

Adjustment buttons (P/R/O/Q)

BREAK TIMER button

FREEZE button

PICTURE MODE button

AUTO SYNC button

Auto Sync

(Auto Sync Adjustment)

Auto Sync function works when detect- ing input signal after the projector turns on.

Press FAUTO SYNC to manually ad- just with Auto Sync function.

Note

•When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 51.)

Displaying and Setting the Break Timer

1 Press k BREAK TIMER.

•The timer starts to count down from 5 minutes.

ROn-screen display

Press P/R/O/Q to adjust the

2 length of the break time.

•Increases with P or Q

5 minutes s6 minutes s60 minutes

•Shortens with O or R

4 minutes s3 minutes s1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break time display function

Press k BREAK TIMER.

Note

•Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

Freezing a Moving Image

1 Press NFREEZE.

• The projected image is frozen.

2 Press NFREEZE again to return to the moving image from the cur- rently connected device.

Selecting the Picture Mode

You can select the appropriate picture mode for the projected image, such as movie or video game.

Press GPICTURE MODE.

•When pressing GPICTURE MODE, the picture

mode changes in the following order:

Standard PresentationMovie Game sRGB *

Note

•See page 42 for details on the picture mode.

*“sRGB” is displayed only when RGB signal is input.

36