Eiki EIP-3000N 2DHCP Client Setting, 3TCP/IP Setting, 4Confirming the Projector Information

Menu operation n Page 40

Setting up the Projector Network Environment (“Network” menu) (Continued)

2DHCP Client Setting

Connect the LAN cable before turning the pro- jector on. If not, the DHCP Client function does not work.

Selectable items	Description
On	Obtains configuration
	parameters for TCP/IP network
	automatically.
Off	Sets the TCP/IP manually.

Select “On” for “DHCP Client”, then press hENTER. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the pa- rameters of IP Address, Subnet Mask and Gate- way on the TCP/IP screen.

If the DHCP server is not available, “Could not obtain IP Address.” appears.

In this case, set the TCP/IP manually. (See the item 3.)

3TCP/IP Setting

Set the TCP/IP manually.

Selectable items	Description
IP Address	Factory default setting:
	192.168.150.002
	Enter an IP address appropri-
	ate for the network.
Subnet Mask	Factory default setting:
	255.255.255.000
	Set the subnet mask to the
	same as that of the computer
	and equipment on the
	network.
Gateway	Factory default setting: 000.
	000. 000. 000
	* When not in use, set to “000.
	000. 000. 000”.

Note

•Confirm the existing network’s segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other net- work equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don’t have to change the projector IP address.

•For details about each setting, consult your network administrator.

1 Select “Off” for “DHCP Client”, then press hENTER.

2 Select “TCP/IP”, then press hENTER.

3 Enter “IP Address” using P, R, Q

and O, then press hENTER.

						Network
Setting the TCP/IP
IP Address	1	9	2	.	1	6	8	. 1		5	0	. 0		0	2
Subnet Mask	2	5	5	.	2	5	5	.	2	5	5	.	0	0	0
Gateway	0	0	0	.	0	0	0	.	0	0	0	.	0	0	0

4Confirming the Projector Information

You can confirm the MAC address and projector name.

Displayed items	Description
MAC Address	The MAC address of the
	projector is displayed.
Projector	The projector name is
	displayed. (Factory preset :
	EIP-3000N)

4

5

Enter “Subnet Mask” using P, R,

Qand O, then press hENTER.

Enter “Gateway” using P, R, Qand O, then press hENTER.

Note

•For information on how to change the projec- tor name, see “SETUP MANUAL” contained in the supplied CD-ROM.

50