Troubleshooting with the “Help” menu
This function advises you to solve the problems during usage.
| Adjustment buttons |
| (P/R/O/Q) |
Utilizing the “Help” menu func- |
|
tions | MENU/HELP |
| button |
ENTER button
Example: When image flickering appears
Operation to solve image flickering when pro- jecting the computer RGB signal.
1 | Press BMENU/HELP. |
2 | Press Oor Qto select “Help”, then |
| press hENTER. |
3 Press P or R to select “Vertical stripes or flickering image ap- pears” on Help menu, then press hENTER.
|
|
|
|
|
|
|
| Pict. | SCR | PRJ | Net. | Help |
|
| Vertical stripes or flickering image appear |
|
| |||
| There is no picture or audio |
|
| |||
| Vertical stripes or flickering image appear |
|
| |||
| Data image is not centered |
|
| |||
| Color is faded or poor |
|
|
| ||
| Picture is dark |
|
|
|
| |
| The image is distorted |
|
|
| ||
| Reset all adjustments to default settings |
|
| |||
|
|
|
|
|
|
|
| SEL. |
|
| ENTER | END |
|
|
|
|
|
|
|
|
Help
Vertical stripes or flickering image appear
Initiate “Auto Sync” Adjustments.
If there is no change after performing "Auto Sync" adjustments, adjust the following items.
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above 
Return
Cur. sig. freq: H 43 kHz / V 60 Hz
SEL. | ENTER | END |
4 Select “Initiate “Auto Sync” Ad- justments”, then press hENTER.
5 If the image is not improved, se- lect “Adjust horizontal noise.”, then press hENTER.
6 Press O or Q to adjust.
|
|
|
|
|
|
| Help |
| ||
| Phase | 0 |
|
|
|
|
|
|
|
|
| SEL./ADJ. | Rtn. Menu | END |
| ||||||
Note
•You can adjust the items with check marks (✔).
•The items in the “Help” menu change, de- pending on the input signal or setting that you have selected.
•If the problem is not solved, refer to “Troubleshooting”. (See pages 59 and 60.)
•When selecting “sRGB” in "Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types.
•When you select “Reset all adjustments to de- fault settings” and then press ENTER, the screen for entering the password appears if a password has been set. (See page 49.)
51