Motorola DCH6416 installation manual Operational Check for the Remote Control

Page 30

3 INSTALLATION

Operational Check for the Remote Control

The operational check tests communication with the remote control:

Table 3-1 Operational check procedures

Feature	Testing Procedure

Power on	Press POWER on the remote control to turn on the DCH6416.
	Tune to the output channel (3 or 4) if using the RF output.

Channel selection	Scan through the channels using the CHANNEL + or - keys.
	Tune to several channels by entering the channel number using the
	numeric keys.
Volume control	Press VOLUME + or - on the remote control to increase the volume to
	its upper limit, lowest level, and to a comfortable level.
	Press MUTE to turn the sound off. Press MUTE again to restore the
	sound.

If the DCH6416 does not operate properly, refer to the Troubleshooting section.

Optimizing the High-Definition Settings

This subsection describes how to optimize SD and HD video settings and closed captioning based on subscriber preferences.

Before you optimize the output settings:

•Connect the DCH6416 receiver to other home entertainment devices

•Plug the DCH6416 receiver into a power outlet

•Initialize the DCH6416 receiver and authorize services

•Turn the TV on

For an HDMI connection, be sure the TV is on and connected to the HDMI connector before adjusting the settings. Motorola recommends using HDMI cables less than 20 meters long.

To optimize the output settings:

1.Power off the DCH6416 and then immediately press the MENU key on the front panel. If the TV is on, the on-screen menu lists the settings you can configure:

20

Image 30

Contents DCH6416 Page Important Safety Instructions FCC Compliance Caring for the Environment by Recycling Page Contents Figures Tables DVR Recording Time GuidelinesPage Features TunersStandard Audio/Video Features Standard DVR FunctionalityStandard Data Features Standard Miscellaneous FeaturesIf You Need Help Calling for RepairsCompany From USA or Canada Outside USA or Canada Front Panel Front Panel Format ButtonVideo Format Indicators Front Panel Display OperationRear Panel Rear panel connectionsCableCARD Removal CableCARDAlert Screens Unsupported CableCARD InsertionInvalid CableCARD-DCH6416 Pairing Invalid CableCARD Security CertificatePage Before You Begin Clearing the Hard DriveSdtv Video Connection OptionsAudio Connection Options HdmiInstallation Overview Determine if you are connecting to aCabling to an Hdtv for Video Cabling to an HdtvCabling to an Hdtv and an A/V Receiver Cabling to an Hdtv and an A/V receiverInstallation Cabling to a Standard-Definition TV and an A/V Receiver Cabling to a Standard-Definition stereo TVCabling to a Standard-Definition TV and Audio Receiver Cabling an audio receiverData Device Connections DCH6416 front panel providesOperational Check for the Remote Control Optimizing the High-Definition SettingsOperational check procedures Feature Testing Procedure Setting DescriptionInstallation Graphics Overlaying the Video Page Using the Diagnostics General StatusDiagnostics Field Description Error Code DescriptionGeneral Status fields are ROM IDPurchase Status Purchase Status fields areOut-Of-Band OOB Status FieldOut-Of-Band Status fields are PID Agile OOB Tuner HuntingEMM PID LKCIn-Band Status Front panel display for in-band diagnostic In-Band Status fields areUnit Address Front panel display of a unit addressUnit Address fields are Separable Security Object Name Object Ver Manufacturer HW Version Current Channel Status Current Channel status fields are AnalogDigital APS RF Modem UpstreamCCI CITDiagnostics RF Modem fields are RF upstream modem front panel displayCode Modules Alternating with Front panel display for code modulesCode Modules fields are Memory Configuration Audio/Video StatusNvram IEC958PCM Audio SpdifOSD Display Description UnmutedXxxxxxxxxxxx Definition OSD Display Diagnostics Interface Status Diagnostics Interface Status fields are User Setting Status Setting DescriptionSERIF, Proportion SERIF, Mono no SERIF, Proportion no Serif DVR/Hard Drive Status Gpfs DVRDocsis Status Fields are DocsisCarrier Lock Frequency Application Specific Information Front Interactive StatusInteractive Status fields are PanelWaitsoack InitwaitdcoWaitlmack WaitlaorsoKeypad-Front Panel Indicators Page Troubleshooting Problem Possible SolutionTroubleshooting This by activating the zoom feature on the TV