Motorola DCH6416 installation manual In-Band Status

Page 42

4DIAGNOSTICS

3.When the desired new frequency has been selected, press the SELECT key to start the search. The manual frequency search will last up to 40 seconds. As the set-top searches, the frequency being searched for will flash on the front panel. On the OSD, the “MAN FREQ” line of text will be cleared, the “HUNT MODE” will display “FIX” to indicate a search on a fixed frequency, and the “OOB FREQ” field will change to the frequency being searched for.

4.If the frequency is found with the proper EMM Provider ID, then the front panel will display the normal OOB receiver status. The OSD “LKC” field will change to display the new frequency.

5.If after 40 seconds the frequency search is not successful, the product will perform a warm reset.

6.To abort a search without waiting the 40 seconds, the POWER key can be pressed to cause an immediate warm reset.

Note: The front panel will display “hunt” after a cold reset from the front panel. This indicates that the product is in a Round Robin Hunt Mode. “hunt” will continue to be displayed until the proper stream is detected.

In-Band Status

This diagnostic displays the in-band status for the last attempted tuned channel. The information is updated every 5 seconds.

32

Image 42
Contents DCH6416 Page Important Safety Instructions FCC Compliance Caring for the Environment by Recycling Page Contents Figures Tables DVR Recording Time GuidelinesPage Features TunersStandard Audio/Video Features Standard DVR FunctionalityStandard Data Features Standard Miscellaneous FeaturesIf You Need Help Calling for RepairsCompany From USA or Canada Outside USA or Canada Front Panel Front Panel Format ButtonVideo Format Indicators Front Panel Display OperationRear Panel Rear panel connectionsCableCARD Removal CableCARDAlert Screens Unsupported CableCARD InsertionInvalid CableCARD-DCH6416 Pairing Invalid CableCARD Security CertificatePage Before You Begin Clearing the Hard DriveSdtv Video Connection OptionsAudio Connection Options HdmiInstallation Overview Determine if you are connecting to aCabling to an Hdtv for Video Cabling to an HdtvCabling to an Hdtv and an A/V Receiver Cabling to an Hdtv and an A/V receiverInstallation Cabling to a Standard-Definition TV and an A/V Receiver Cabling to a Standard-Definition stereo TVCabling to a Standard-Definition TV and Audio Receiver Cabling an audio receiverData Device Connections DCH6416 front panel providesOperational Check for the Remote Control Optimizing the High-Definition SettingsOperational check procedures Feature Testing Procedure Setting DescriptionInstallation Graphics Overlaying the Video Page Using the Diagnostics General StatusDiagnostics Field Description Error Code DescriptionGeneral Status fields are ROM IDPurchase Status Purchase Status fields areOut-Of-Band OOB Status FieldOut-Of-Band Status fields are PID Agile OOB Tuner HuntingEMM PID LKCIn-Band Status Front panel display for in-band diagnostic In-Band Status fields areUnit Address Front panel display of a unit addressUnit Address fields are Separable Security Object Name Object Ver Manufacturer HW Version Current Channel Status Current Channel status fields are AnalogDigital APS RF Modem UpstreamCCI CITDiagnostics RF Modem fields are RF upstream modem front panel displayCode Modules Alternating with Front panel display for code modulesCode Modules fields are Memory Configuration Audio/Video StatusNvram IEC958PCM Audio SpdifOSD Display Description UnmutedXxxxxxxxxxxx Definition OSD Display Diagnostics Interface Status Diagnostics Interface Status fields are User Setting Status Setting DescriptionSERIF, Proportion SERIF, Mono no SERIF, Proportion no Serif DVR/Hard Drive Status Gpfs DVRDocsis Status Fields are DocsisCarrier Lock Frequency Application Specific Information Front Interactive StatusInteractive Status fields are PanelWaitsoack InitwaitdcoWaitlmack WaitlaorsoKeypad-Front Panel Indicators Page Troubleshooting Problem Possible SolutionTroubleshooting This by activating the zoom feature on the TV