Motorola DCH6416 installation manual Gpfs, Dvr

4 DIAGNOSTICS

Field	Description
Encoder	Information about the analog encoder for the IEEE-1394 output and recording analog
	programs
Number	Indicates the encoder number—1 or 2
Type	Indicates the encoder type—Not Installed, MPEG2, Other, or Unknown
Quality	Indicates the encoder quality setting (video bit rate) for analog services only, which may
	change at any time through software:
	•	LOW1—1 Mbps
	•	LOW2—2 Mbps
	•	MEDIUM1—3 Mbps
	•	MEDIUM2—4 Mbps
	•	HIGH1—5 Mbps
	•	HIGH2—6 Mbps
	• NOT AVAILABLE—the encoder is not enabled or configured
Drive	The drive type—IDE (internal), 1394, USB (external), or NOT AVAILABLE (neither enabled
	nor configured)
Record	The remaining recording capacity, in bytes
Capacity
Remaining
Number of	The number of internal and external hard drives, up to a maximum of 9
Installed
Drives
Drive	The identification number sequentially assigned to each installed drive and whether the
	drive is Internal or External
Model	The drive model number assigned at the factory
Number
Device ID	A text string of up to 20 characters that identifies the disk drive; “N/A” is displayed if the
	value is invalid or cannot be retrieved
Type	The drive type—IDE, 1394, USB, or Unkn(own)
Total Size	The drive size in decimal GB. (1 decimal GB = 1x109 bytes. For example, 120 decimal GB
	= 120x109 bytes.)
System,	The space used and allocated in MB for each of the internal hard drive’s partitions—
GPFS,	System, GPFS, DVR Content, and DVR Index (1 binary MB = 220 bytes). “N/A” displays if
DVR	the value is invalid or cannot be retrieved.
Content,
and DVR
Index
State	The hard drive state:
	• Standby—The hard drive is working normally, but is at rest (the State returns to
		Active any time disc access is necessary).
	• Active—The hard drive is accessing data.
	• Failed—The hard drive hardware has failed.
Temp (F)	For an internal hard drive only, its temperature in degrees F
Max Temp	For an internal hard drive only, its maximum temperature in degrees F

56