Motorola DCH6416 installation manual Separable Security, Field Description

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the CableCARD and CableCard Interface with the DCH.

Field	Description
CARD Interface	CableCARD Interface is a status indication of the interface between the Host
	and CableCARD. It will indicate ‘Good’ if no errors were detected, ‘Error’ if
	there is a problem detected with establishing the CableCARD interface, or
	‘Unsupported CARD’ if the inserted CableCARD is not an M-Card.
CableCARD ID	The unique identifier provided by the CableCARD.
Host ID	The unique identifier in the Host Device Certificate.
Data ID	A value generated by the CableCARD for the Pairing report.
Validation	•	UKNOWN if a Validation message was not received by the product.
	•	VALID or INVALID as set by the Host Validation Message received
		from the headend.
	•	BINDING if the CableCARD is busy with the binding authentication
		process.
	•	NOT BOUND if Card validation status in not bound for CableCARD
		reasons.
	•	HOST CERTIFICATE INVALID if the status is not bound because
		the Host Certificate was invalid.
	•	HOST SIGN FAILED if status is not bound because of failure to
		verify Host’s SIGN.
	•	AUTH KEY FAILED if status in not bound because of failure to
		match AuthKey from the Host Device.
	•	FAILED if binding failed for other reasons.
Pairing Rpt Method	Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or
	set to ‘Unknown’ if the headend message was not received.
MSO Phone Number	MSO Phone Number as configured at the headend.
CableCARD

36