Installation and Connection | DRS5116 |
|
|
Installation and Connection
4. Connecting & Running
4.1. Connecting Camera
(1) Connect the CCTV camera to the DRS with the BNC cable as shown below.
<Note>
1.The video type for all channels should be either NTSC or PAL.
2.The DRS sets video signal’s impedance (75Ω) automatically. Impedance is set as 75Ω. When connecting a device to video output, impedance will be
3.Video type (NTSC/PAL) should be changed prior to installing the DRS Unit. To change the video type, it is recommended to contact the closest local Wren distributor. When changing it, refer to “Appendix #2. Changing Video Type”. Wren is not responsible for any service warranty about a problem due to careless change.
Wren | 2003. 09. 06 (v 1.0) | 18 |