Wren Associates DRS5116, DRS5004 Alarm Pop-up sec, Seq. Switchingsec, User Sequence Configuration

Basic Configuration DRS5116

16.6. Monitor

This menui s used to display an image on Monitor A & Monitor B.

Alarm Pop-up (sec)

This function is used to set the alarm pop-up screen. . The pop-up duration time can be set between 5 and 10 seconds. If the setting is set on “Keep”, the pop-up screen keeps holding. In order to cancel the keep mode, press another channel button.

Seq. Switching(sec)

This function is used to set sequence time between 1 and 60 seconds.

<Note>

If channel 1 pops up and channel 2 also pops up during pop-up hold time, the screen is changed to a quad-split screen and channel 1 and 2 are shown. The pop-up hold time is extended automatically (up to 8 channels).

User Sequence Configuration

This function is used to set the user sequence mode.

Wren 2003. 09. 06 (v 1.0) 93