Installation and Connection | DRS5116 |
|
|
9. Connecting and Configuring DIO Ports
<Note> Wire Handling
Trimming Wire
When connecting a wire to a terminal block, follow the instructions below. Note the different types of wire that can be used.
Stranded Wire: Peel off the wiring cover 8~10mm and solder it. The wire gage should be AWG 22~26.
Solid Wire: Peel off the wiring cover 8~10mm and solder it. The wire gage should be AWG 20~26.
Inserting & Removing Wire
To insert the wire, use a screwdriver as shown in the diagram to the right.
Wren | 2003. 09. 06 (v 1.0) | 33 |