Basic Configuration | DRS5116 |
|
|
<TIP>
When assigning a name to a channel, the following dialogue box will appear. This box is also used later in the system, but the method is always the same.
-To select a letter, use the [ARROW]/(◄◄ and ►► ) buttons or the number buttons, “0” to “9” on the DRS5116 front panel. When using the [ARROW] buttons, use the [PLAY]/ (►) button to select each choice.
-The intersection between the horizontal and the vertical bar is the selected choice.
-Press the (►) button to confirm the selected value.
-Or enter the related numbers in order of horizontal/vertical. (For example, in order to select “C”, press the [3] and [2] buttons)
-After setting all values, press the [Exit] button.
-Function Keys
9: Enter
: Back Space & Delete
: Space
◄: Left
► : Right
: Previous Code Page
: Next Code Page
Status
Wren | 2003. 09. 06 (v 1.0) | 79 |