Wren Associates DRS5016, DRS5004, DRS5116, DRS5008 manual Running OSD Menu, Using Menu

Installation and Connection DRS5116

5. Running OSD Menu

5.1. Using Menu

Press the [MENU] button to open the OSD Configuration menu.

(1)Main Menu

(2)Sub-Menu

(3) Setting Page

(1)Main Menu Tabs: The selected tab is shown in blue and the related sub-menus will be shown below the tab. To move to the previous/next Main Menu Tab, use the [◄◄/►►] arrow buttons. To move to a sub-menu, press the [ENTER] or [▼] buttons.

(2)Sub-Menu: The selected sub-menu is shown in blue and the related setting page will be shown to the right of the sub-menu. Use the [▲/▼] arrow buttons to move within the sub-menu list. To move to the setting page, press the [ENTER] button. To exit the setting page, press the [EXIT] button.

(3)Setting Page: The selected item is shown in gray. To move within each page, use the [◄◄/►►] or [▲/▼] arrow buttons. Press the [ENTER] button to change the value of a setting. When the setting value is a word, a dialogue box to edit the word will open. When the setting value is a number, it should be set with using the [◄◄/►►] or [▲/▼] arrow buttons. After the value is set, press the [EXIT] button. To exit the Setting Page, press the [EXIT] button.

(4)Help message: Related information for each menu/setting will be displayed here.

Wren 2003. 09. 06 (v 1.0) 22