Wren Associates DRS5004 manual Connecting Serial Port, Configuring Serial Ports for Pan/Tilt/Zoom

Installation and Connection DRS5116

* DRS5016/5116 Models *

<Note>

(1)For detailed information for setting, please refer to the “ DRS Programming Guide”..

9.3.Connecting Serial Port

9.3.1. Configuring Serial Ports for Pan/Tilt/Zoom

The DRS series units have most major PTZ protocols already pre-programmed. Certain makes and models not supported can still be controlled using the Transparent Protocol. For a list of supported protocols, refer to the list on the OSD Configuration menu.

The following figure shows how to connect the PTZ camera to RS485 (COM2). When using another serial port, connect it with referring to each connection diagram below.

Wren 2003. 09. 06 (v 1.0) 40