Installation and Connection | DRS5116 |
|
|
9.5. Connecting USB Device
The USB port can be used to copy up to one minute of images to a USB Flash memory disk. When
connecting a USB device, do not exceed the rated values of the USB device.
USB Spec. | Ver 1.1 (Max 12M bps) |
Available Device | USB Memory Stick, |
Output Voltage/Current | Max. 200mA per DC 5V Port |
<Note>
The disk should be formatted with FAT32 type.
If properly connected, the disk is recognized automatically as shown in the following picture. To copy images, the process is as follows: Set copy range (up to 1 minute) Æ Select drive Æ Copy (press “Start”).
Wren | 2003. 09. 06 (v 1.0) | 46 |