Installation and Connection | DRS5116 |
|
|
11.2. Configuring DRS Network Information
The following description is on based on Ethernet connection. For more detailed information on the Network Settings Page, please refer to the “ DRS Programming and Maintetnance Guide”.
(1)Press the [MENU] button.
(2)Select “System” using the [◄◄/►►] buttons and press the [ENTER] button.
(3)Select “Network” using the [▲/▼] buttons and press the [ENTER] button.
(4)Select “IP Addr” using the [▲/▼] buttons and press the [ENTER] button.
(5)Press the [EXIT] button after entering the IP address in the dialogue box.
(6)Select “Net Mask” using the [▲/▼] buttons and press the [ENTER] button.
(7)Press the [EXIT] button after entering Net Mask in the dialogue box.
(8)Select “Gateway” using the [▲/▼] buttons and press the [ENTER] button.
(9)Press the [EXIT] button after entering Gateway in the dialogue box.
(10)Select “DNS” using the [▲/▼] buttons and press the [ENTER] button.
(11)Press the [EXIT] button after entering DNS in the dialogue box.
(12)Press the [EXIT] button to exit the page.
Wren | 2003. 09. 06 (v 1.0) | 50 |