Wren Associates DRS5016, DRS5004, DRS5116 Setting Motion Detection, MD Area, Include Video Loss

Basic Configuration DRS5116

16.4.2. Setting Motion Detection

This screen is used for setting each MD condition per channel. “Global” means to set all channels by same MD condition. It is possible to set each channel separately.

Motion Detection

Choose from among four sensitivity conditions; Off, Low, Standard, and High.

MD Area

Customize the MD area among 64 sectors (8 sectors x 8 sectors).

The default value is “Select All”. Select “Custom Area” to move to the setting page.

Include Video Loss

Set whether no video situation is set as MD or not.

<Note>

After setting it as “Global”, press the “Apply” button.

Wren 2003. 09. 06 (v 1.0) 86