Philips DMP-BD65 operating instructions Connecting to a broadband network BD65, Easy Setting

STEP 3 : Connecting to a broadband network [BD65]

The following services can be used when this unit is connected to broadband.

≥Firmware can be updated

≥You can enjoy the BD-Live

≥You can enjoy the VIERA CAST

For details about connection method, refer to the instructions supplied with the connected equipment.

≥The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports, stations, cafes etc.

∫Using LAN (ethernet) cable

Using Wireless

LAN Adaptor

DY-WL10 (optional)

	Wireless LAN Adaptor
LAN Cable	(optional)
(Straight)
	Wireless router
Broadband	(Access point), etc.
router, etc.

InternetInternet

≥Use shielded LAN cables when connecting to peripheral devices.

≥Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

≥Only the Wireless LAN Adaptor DY-WL10 (optional) can be used.

≥When connection conditions are poor, use the USB extension cable supplied with the Wireless LAN Adaptor DY-WL10 (optional).

≥Read the operating instructions for the Wireless LAN Adaptor DY-WL10 (optional) thoroughly when using it.

≥For up to date compatibility information on your Wireless router (Access Point) refer to http://panasonic.jp/support/global/cs/

STEP 4 : Setting

Easy Setting

After connecting your new player for the first time and pressing the [Í], a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í].

Setup screen appears.

If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this TV.

Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Follow the on-screen instructions and make the settings with [3, 4] and press [OK].

“On-Screen Language”, “TV Aspect” and “Quick Start” are set. ([FUNCTION MENU]B“To Others”B“Setup”B “Display”, “TV / Device Connection” or “General”)

[BD65] After completing “Easy Setting”, you can perform “Network Easy Setting”.

≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. ([FUNCTION MENU]B“To Others”B“Setup”B“General”)

Network Easy Setting [BD65]

After completing “Easy Setting”, you will be asked to perform “Network Easy Setting”.

Select “Wired” or “Wireless” and press [OK].

∫“Wired” connection

Follow the on-screen instructions to make your connection settings.

∫“Wireless” connection

If you select “Wireless” and “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.

Select “WPS (PUSH button)” or “Search for access point” and then follow the on-screen instructions and make the settings.

English

(7)7

VQT2H96