Display panel symbol/messages
The following symbols/messages may appear on your recorder display:
00:00
Multifunction display/text line
–Title/track number
–Total/elapsed/remaining title/track time
–Disc/title name
–Error or warning messages
–Additional information regarding the disc
–TV channel number or source of video
–Clock (This is displayed in Standby mode).
–TV programme title
D
Remote control command for the recorder has been received.
XTIMER
A timer recording has been programmed or is active.
!SAT
The recorder is prepared for satellite recording.
BLOCKED
The disc tray cannot be opened or closed due to some mechanical obstruction.
CLOSING
Disc tray is closing.
DISC FULL
Disc is full. There is no storage space for new recordings.
EMPTY
No recordings in the hard disk drive or recordable DVD.
IS TVON?
The recorder is currently in the basic installation mode. Turn on your TV and read chapter ‘Step3: Installation and
LIVE P_XX
The current live TV channel.
MENU
The disc menu or timer menu display is on.
NO DISC
No disc has been inserted. If a disc has been inserted, then it is possible that the disc cannot be read.
NO SIGNAL
No signal or poor signal strength.
OPENING
Disc tray is opening.
READING
Disc is being recognised by the recorder.
STARTING
The recorder has been turned on.
WAIT _XX
Wait until this message disappears. The recorder is busy processing an operation.
XXindicates the number of found channels, and is constantly updated.
69
dvdr3300h_uk_eng_17233d.indd 69 |