Denon AVR-5700 Setting the delay time, Subwoofer Only THX recommended THX mode, Front & Subwoofer

Page 20

2

Switch to the Bass Output screen.

ENTER

3

4

Select the bass signal playback mode.

Enter the setting.

The System Setup Menu reappears.

ENTER

Playback modes

Subwoofer Only THX (recommended THX mode)

The LFE and the low frequencies (80 Hz or lower) of the channels set to “Small” at the Speaker Configuration screen are output from the subwoofer.

When a channel is set to “Large”, the low frequencies are output from that channel and not from the subwoofer.

Front & Subwoofer:

Even if “Large” is set for the front speakers at the Speaker Configuration screen, the LFE and the low frequencies of the front channels as well as the low frequencies of the other channels are output from the subwoofer. The front speakers (left and right, but not the center) also output deep bass. This mode is provided for those with large, floor-standing tower speakers that have full range (20 Hz and up) response, and are using a subwoofer in the system as well.

NOTE:

To play in the Front & Subwoofer mode, set the front speakers to “Large” and the subwoofer to “Yes” at the Speaker Configuration screen.

Setting the delay time

Input the distance between the listening position and the different speakers to set the delay time for the surround mode.

The delay time can be set separately for surround speakers A and B.

Preparations:

Measure the distances between the listening position and the speakers (L1 to L4 on the diagram at the right).

L1: Distance between center speaker and listening position

L2: Distance between front speakers and listening position

L3: Distance between surround speakers and listening position

L4: Distance between subwoofer and listening position

FL

Center

 

FR

L2

L1

Subwoofer

 

L4

Listening position

 

 

L3

SL

SR

 

1

At the System Setup Menu select “Delay Time”.

 

20

Image 20
Contents AVR-5700 Safety Precautions Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Connecting a video component equipped with S-Video jacks Precaution when using S-jacksConnecting a monitor TV Connecting the video decksConnection of AM antennas Connecting the antenna terminalsAM loop antenna assembly Connecting a DVD player DVD in jacks Connecting a monitor TV Monitor OUT jackConnecting the external input EXT. in jacks Connecting the Multi Source jacksConnecting the speaker cords Speaker system connectionsSpeaker Impedance ConnectionsProtector circuit Part Names and Functions Front PanelRemote control unit Power button …………………………36 Tuner buttons …………………………52Setting UP the System System Setup buttonSurround Parameter button Enter buttonSurround speaker selector function Before setting up the system Setting the type of speakersSetting the bass output Enter the settingSystem Setup Menu reappears At the System Setup Menu select Bass OutputSetting the delay time Subwoofer Only THX recommended THX modeAt the System Setup Menu select Delay Time Front & SubwooferSelect the desired unit, meters or feet Select darken the desired units, Meters or FeetSurr. Sp. a Setting the channel levelTest tone A, B or A+B Channel Level screen reappears Volume can be adjusted between -12 dB and +12 dB in unitsWhen the Manual mode is selected Subwoofer peak limit level setting AVR-5700 automatically sets the subwoofer peak limit levelSetting the digital inputs Setting the on-screen display OSD Auto tuner presetsAfter completing system setup On-screen display signalsInserting the batteries Remote Control UnitUsing the remote control unit Set mode switch 2 to the position for the component to be Operated. The tuner can be operated when the switch is atOperating Denon audio components Any position but LockPreset memory VCR Operating a video component stored in the preset memory Set the slide switch to the component to be registered VDPVCR or TV Operate the video componentLearning function System call buttons Using the system call functionSystem call function Storing signals Clearing system call settingsOperation Before operatingSelect the input mode Selecting the analog mode Input mode selection functionPlaying the input source Select the input source to be playedSelect the play mode Manual Auto mode Digital Auto mode Digital PCM modeAdjust the volume Input mode when playing DTS sourcesAdjusting the sound quality tone Listening over headphonesAfter starting playback Turning the sound off temporarily mutingPlaying one source while recording another REC OUT mode Multi-source recording/playbackPlayback using the external input EXT. in jacks Multi-source and multi-zone playback Multi Room Music Entertainment SystemBefore playing with the surround function Adjust the level of the selected speakerSurround Dolby Surround Pro Logic mode Fader functionSet the input mode to Auto or RF Set the input mode to Auto or DigitalSelect the Dolby Surround mode DTS indicator lights when playing DTS sourcesSurround parameters Cinema EQ. Cinema Equalizer COMP. Dynamic Range CompressionLFE Low Frequency Effect Dialogue NormalizationHome THX Cinema mode Personal Memory Plus Surround modes and their featuresDSP Surround Simulation Wide Screen can only be selected from the main unit Select the surround mode for the input channelDSP surround simulation Tone control setting Select ToneSurround parameters Surround modes and parametersListening to the Radio Auto tuningManual tuning Checking the preset stations Initialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Types of multi-channel signals Additional InformationOptimum surround sound for different sources Types of sources Movie audioWhen using different surround speakers for movies and music Speaker setting examplesBasic setting for primarily watching movies Surround Dolby Surround Dolby Digital Dolby Surround AC-32Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS compatible media and playback methods DTS Digital SurroundDolby Pro Logic Home THX Cinema surround mode Re-equalizerTimber matching circuit Dynamic decorrelation circuitSurround modes and parameters AUX TAPE-1Specifications Audio section Power amplifier Rated outputPage 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan