Denon AVR-5700 manual Operation, Before operating

Clearing “learned” remote control signals and resetting the preset memory

1	Press the USE/LEARN selector button with the tip of a pen,
	etc., to set the learn mode.

4		START	LEARNED/TX
	SYSTEM CALL		POWER
	SET	CALL	OFF	ON / SOURCE
	DVD	VDP	TUNER	SHIFT
	1	2	3
	TV/DBS	V.AUX	PHONO
	4	5	6
	VCR-1	CD	MD / TAPE-1	CHANNEL
	7	8	9
	VCR-2		TAPE-2 MON	TV/VCR
	+10	0		A / B
	VOLUME			DISC SKIP+
		DOLBY / DTS
	HOME THX CINEMA	SURROUND	DIRECT
	DSP SIMULATION	5CH STEREO	STEREO
				MASTER VOL.
	INPUT MODE	ANALOG	EXT.IN

2	To clear “learned” remote control signals, set the slide
	switch to the position at which the signals were “learned”.
	To clear the preset memory settings, set the slide switch to

“VIDEO”.

2	AUDIO		DECK	MD
			CD	LOCK	MUTING
	AVR/AVC	VIDEO	DVD	TV		3
			VDP	VCR
			SYSTEM		SURROUND
	TUNING		SETUP		PARAMETER
	BAND		TITLE		MENU/GUIDE
				CH SELECT

AUDIO

MODE		ENTER
		SELECT
MEMORY	PANEL	ON SCREEN
	DISPLAY	RETURN

	AVR/AVC	VIDEO		1,5	USE/LEARN T.TONE MULTI	DVD
3			4	Press the SYSTEM CALL SET button, and hold it in for at
	Set the slide switch to the position at which the signals were			least four seconds.
	“learned” or at which the preset memory settings were set.			• When both the START and LEARNED/TX LEDs light
				simultaneously, all the stored codes are cleared.
	DECK	MD				Lit
	CD	LOCK
	DVD	TV
	VDP	VCR
			5	Press the USE/LEARN selector button.

9 OPERATION

Before operating

1	Refer to “CONNECTIONS” (pages 6 to 13) and check that all
	connections are correct.
2	Set the remote control unit’s slide switch to the AUDIO
	position. (only when operating with the remote control unit)
		AUDIO
		AVR/AVC	VIDEO
	3
3	Turn on the power.
	Press the POWER switch (button).

	START	LEARNED/TX	RC-853
				3
SYSTEM CALL		POWER
SET	CALL	OFF	ON / SOURCE
DVD	VDP	TUNER	SHIFT

1 2 3

		TV/DBS	V.AUX	PHONO
ON / STANDBY	ON/STANDBY	4	5	6
ON / SOURCE		VCR-1	CD	MD / TAPE-1 CHANNEL
		7	8	9

Lights	VCR-2		TAPE-2 MON	TV/VCR
	+10	0		A / B
OFF
		VOLUME		DISC SKIP+

(Main unit) (Remote control unit)

2

	DOLBY / DTS
HOME THX CINEMA	SURROUND	DIRECT
DSP SIMULATION	5CH STEREO	STEREO
			MASTER VOL.
INPUT MODE	ANALOG	EXT.IN
AUDIO	DECK	MD
	CD	LOCK	MUTING

AVR/AVC	VIDEO	DVD	TV
		VDP	VCR

TUNING

SYSTEM

SETUP

SURROUND PARAMETER

•¢ON/STANDBY

The power turns on and “ON/STANDBY” indicator is lit.

Several seconds are required from the time the power switch is set to the “ON” position until sound is output. This is due to the built-in muting circuit that prevents noise when the power switch is turned on and off.

Set the POWER switch to this position to turn the power on and off from the included remote control unit (RC-853).

•£OFF

The power turns off and “ON/STANDBY” indicator is off.

In this position, the power cannot be turned on and off from the remote control unit.

36