Denon Complete Guide to AVR Speaker Setup and Configuration

Page 17

ENGLIS

•Speaker system layout Basic system layout

• The following is an example of the basic layout for a system consisting of seven speaker systems and a television monitor:

Subwoofer

Center speaker system

Surround back speaker systems

	Front speaker systems
	Set these at the sides of the TV or screen with
	their front surfaces as flush with the front of the	Surround speaker systems
	screen as possible.	Surround speaker systems
	screen as possible.

Before setting up the system

1	Check that all the connections are correct, then turn on the main unit’s power.

Display the System Setup Menu.

SYSTEM

SETUP

TITLE

Setting the type of speakers

•The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.

1	At the System Setup Menu select “Speaker Configuration”.

2	Switch to the speaker configuration screen.
	ENTER

Image 17

Contents AVR-2802/982 English Francais Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Connecting the video decks Connecting a video component equipped with S-Video jacksPrecaution when using S-jacks Connecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksAM loop antenna assembly Connecting the antenna terminalsAn F-type FM antenna cable plug can be connected directly Connection of AM antennasConnecting the Multi Zone jacks Connecting the external input EXT. in jacksConnection the speaker terminals Connecting banana plugsSpeaker system connections Englis Precautions when connecting speakersFront Panel Part Names and FunctionsSystem Call buttons Remote control unitSystem Setup button Setting UP the SystemEnter button Cursor buttonsDisplay the System Setup Menu Before setting up the systemSetting the type of speakers Frequency mode is sent to the subwoofer Press the Enter button to finalize the settingNone…… Select this when no speakers are installed ParametersAssignment of low frequency signal range Setting the Crossover Frequency and Subwoofer modeSubwoofer mode Crossover FrequencySetting Preparations Setting the delay timeSelect Test Tone Mode Setting the channel levelAdjust the level Select the modeVolume Select Auto or ManualTo select the input source Setting the digital in assignmentAuto tuner presets Setting the on-screen display OSDOn-screen display signals After completing system setupInserting the batteries Remote Control UnitUsing the remote control unit Be operated with this remote control Set mode switch 2 to the position for the component to beOperating Denon audio components OperatedCombinations of Personal System Codes Preset memory Audio componentPreset memory Video component DVD VDP VDP, VCR or TV Operating a video component stored in the preset memoryOperate the video component DVD player system buttonsLearning function System call buttons Using the system call functionSystem call function Clearing system call settings Storing signalsBefore operating Clearing learned remote control signalsOperation Input mode selection function To select the input source when RECPlaying the input source Select the input source to be playedDigital DTS mode Digital PCM modeAnalog mode Input signal displayAfter starting playback Playback using the external input EXT. in jacksAdjusting the sound quality tone Checking the currently playing program source, etc Listening over headphonesTurning the sound off temporarily muting Multi-source recording/playback Playing one source while recording another REC OUT modeMulti-zone playback with multi-source Before playing with the surround function SurroundFader function Select the Dolby Surround Pro Logic II modeDolby Pro Logic indicator lights Dimension Control Surround parameters q Pro Logic II ModePanorama Control Center Width ControlSelect the Dolby/DTS Surround mode Set the input mode to Auto or DTSDolby Digital indicator lights When playing Dolby Digital sourcesDialogue Normalization Select the various parameters Adjust the parameter settingsMenu Personal Memory Plus Surround modes and their featuresDSP Surround Simulation Set the parameters DSP surround simulationPress the Surround Parameter button When turned clockwiseWhen turned counterclockwise Tone control setting Music CinemaSurround modes and parameters Listening to the Radio Auto tuningManual tuning Checking the preset stations Preset memoryInitialization of the Microprocessor Recalling preset stationsLast Function Memory Troubleshooting Additional Information Types of multi-channel signalsTypes of sources Movie audio Movie theater sound fieldNumber of surround back speakers Surround back speakersWhen not using surround back speakers Speaker setting examplesDolby Surround Dolby Digital Dolby Surround AC-3 SurroundDolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS compatible media and playback methods DTS Digital SurroundDTS-ESTMMatrix DTS-ESTMDiscreteDTS Neo6TM surround DTS Neo6 CinemaDVD TV/DBS Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan Page Page Page First name in digital audio Speaker Configuration Delay Time Digital In Assignment