Denon AVR-2802/982 operating instructions Surround, Before playing with the surround function

ENGLISH

10

SURROUND

Before playing with the surround function

•Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 22) or from the remote control unit, as described below.

•Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically stored in the memory.

1 Press the T. TONE button.

T.TONE

1,3

	SYSTEM	SURROUND
TUNING	SETUP	PARAMETER
BAND	TITLE	MENU/GUIDE
		CH SELECT
MODE		ENTER
		SELECT
MEMORY	STATUS	ON SCREEN
	DISPLAY	RETURN
USE/LEARN T.TONE	MULTI	DVD
		SET UP

2

(Remote control unit)

2	Test tones are output from the different speakers. Use the	3	After completing the adjustment, press the T. TONE button
	channel volume adjust buttons to adjust so that the volume of		again.

the test tones is the same for all the speakers.

T.TONE

(Remote control unit) (Remote control unit)

•After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.

1	Select the speaker whose level you want to adjust.
	CH VOL	CH SELECT

B

ENTER

(Main unit) (Remote control unit)

The channel switches as shown below each time the button is pressed.

FL	C	FR	SR	SB	SL
	FADER			SW

2	Adjust the level of the selected speaker.
	SELECT

(Main unit) (Remote control unit)

Only adjustable when the channel is selected with the CH VOL buttons on the main unit.

NOTES:

•The adjustment range for the different channels is +12 dB to

–12 dB.

•When using the DIRECT mode, the sound from the subwoofer can be cut by lowering the SW (subwoofer) setting one step from –12 dB (setting it to “OFF”).

When the surround back speaker setting is set to “2spkrs” for “Speaker Configuration”, this is set to “SBR”, “SBL”.

2 1

	START	LEARNED/TX	RC-903
SYSTEM CALL		POWER
SET	CALL	OFF	ON / SOURCE
DVD	VDP	TUNER	SHIFT
1	2	3
TV/DBS		PHONO
4	5	6
VCR-1	CD	CDR / TAPE	CHANNEL
7	8	9
VCR-2/V.AUX			TV/VCR
+10	0		A / B
VOLUME			DISC SKIP+
	DOLBY / DTS
SPEAKER	SURROUND	DIRECT
DSP SIMULATION	5CH / 6CH STEREO	STEREO
			MASTER VOL.
INPUT MODE	ANALOG	EXT.IN

AUDIO		TAPE	CDR/MD
		CD	MULTI	MUTING
AVR/AVC	VIDEO	DVD	TV
		VDP	VCR

		SYSTEM	SURROUND
	TUNING	SETUP	PARAMETER
	BAND	TITLE	MENU/GUIDE
			CH SELECT
1	MODE		ENTER	2
			SELECT
	MEMORY	STATUS	ON SCREEN
		DISPLAY	RETURN
	USE/LEARN T.TONE	MULTI	DVD
			SET UP

42