Denon AVR-2802/982 Press the Enter button to finalize the setting, Parameters, To the subwoofer

Page 18

ENGLISH

Set whether or not speakers are

3 connected and, if so, their size parameters.

• To select the speaker

• To select the parameter

Center Sp.

Front Sp.

Subwoofer

Surround Sp.

Surround back Sp.

4	Press the ENTER button to finalize the setting.
	Press the ENTER button to finalize the setting.
	ENTER

NOTE:

•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

•When “2spkrs” is selected for the surround back channel, and external integrated pre-main amplifier or power amplifier must be connected to the pre-out jacks (SBL and SBR). (See page 13.)

•Parameters

Large...................Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the

	Crossover Frequency mode.
Small	Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set
	for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover
	Frequency mode is sent to the subwoofer.
	When this setting is selected, low frequencies of below the frequency set for the Crossover Frequency mode are assigned
	to the subwoofer.
None……	Select this when no speakers are installed.
Yes/No…	Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.
2spkrs/1spkr	Set the number of speakers to be used for the surround back channel.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.

For the majority of speaker system configurations, using the Small setting for all five main speakers and Subwooofer On with a connected subwoofer will yield the best results.

18

Image 18

Contents AVR-2802/982 English Francais Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Connecting a video component equipped with S-Video jacks Precaution when using S-jacksConnecting the video decks Connecting a DVD player DVD in jacks Connecting a monitor TV Monitor OUT jackAn F-type FM antenna cable plug can be connected directly Connecting the antenna terminalsAM loop antenna assembly Connection of AM antennasConnecting the external input EXT. in jacks Connecting the Multi Zone jacksConnecting banana plugs Speaker system connectionsConnection the speaker terminals Precautions when connecting speakers EnglisPart Names and Functions Front PanelRemote control unit System Call buttonsEnter button Setting UP the SystemSystem Setup button Cursor buttonsBefore setting up the system Setting the type of speakersDisplay the System Setup Menu None…… Select this when no speakers are installed Press the Enter button to finalize the settingFrequency mode is sent to the subwoofer ParametersSubwoofer mode Setting the Crossover Frequency and Subwoofer modeAssignment of low frequency signal range Crossover FrequencySetting Setting the delay time PreparationsSetting the channel level Select Test Tone ModeVolume Select the modeAdjust the level Select Auto or ManualSetting the digital in assignment To select the input sourceSetting the on-screen display OSD Auto tuner presetsAfter completing system setup On-screen display signalsRemote Control Unit Using the remote control unitInserting the batteries Operating Denon audio components Set mode switch 2 to the position for the component to beBe operated with this remote control OperatedPreset memory Audio component Preset memory Video componentCombinations of Personal System Codes DVD VDP Operate the video component Operating a video component stored in the preset memoryVDP, VCR or TV DVD player system buttonsLearning function Using the system call function System call functionSystem call buttons Storing signals Clearing system call settingsClearing learned remote control signals OperationBefore operating Playing the input source To select the input source when RECInput mode selection function Select the input source to be playedAnalog mode Digital PCM modeDigital DTS mode Input signal displayPlayback using the external input EXT. in jacks Adjusting the sound quality toneAfter starting playback Listening over headphones Turning the sound off temporarily mutingChecking the currently playing program source, etc Playing one source while recording another REC OUT mode Multi-source recording/playbackMulti-zone playback with multi-source Surround Before playing with the surround functionSelect the Dolby Surround Pro Logic II mode Dolby Pro Logic indicator lightsFader function Panorama Control Surround parameters q Pro Logic II ModeDimension Control Center Width ControlDolby Digital indicator lights Set the input mode to Auto or DTSSelect the Dolby/DTS Surround mode When playing Dolby Digital sourcesSelect the various parameters Adjust the parameter settings MenuDialogue Normalization Surround modes and their features DSP Surround SimulationPersonal Memory Plus DSP surround simulation Set the parametersWhen turned clockwise When turned counterclockwisePress the Surround Parameter button Tone control setting Cinema MusicSurround modes and parameters Auto tuning Manual tuningListening to the Radio Preset memory Checking the preset stationsRecalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Types of sources Movie audio Types of multi-channel signalsAdditional Information Movie theater sound fieldSurround back speakers Number of surround back speakersSpeaker setting examples When not using surround back speakersDolby Digital and Dolby Pro Logic SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital compatible media and playback methodsDTS Digital Surround DTS compatible media and playback methodsDTS Neo6TM surround DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6 CinemaDVD TV/DBS Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan Page Page Page First name in digital audio Speaker Configuration Delay Time Digital In Assignment