Denon AVR-2802/982 operating instructions Setting

ENGLISH

Setting the SB CH Auto Flag Detect

Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes.

1	ENTER	At the System Setup Menu select “SB CH Auto Flag
		Detect” and press the ENTER button.

2 Select the desired setting.

We recommend setting this to “OFF”.

When set to “ON”, then set the operation for software for which no identification signals are recorded (Non-Flag Source).

Setting

qAuto Flag Detect Mode (AFDM)

ON:	This function only works for sources containing DTS-ES or 6.1-channel surround identification signals.
	When this function is used, sources that have been recorded in 6.1-channel surround or DTS-ES are automatically played in the 6.1-
	channel surround mode using the surround back speaker(s). (Refer to w for the method of playback of the surround back speaker in
	this case.)
OFF:	Set this mode if you wish to play normal 5.1-channel sources or sources not containing the identification signals in the 6.1-channel
	mode.

wNon-Flag Source SBch Output

	MTRX ON:	Sources are played using the surround back speaker(s). The surround back channel is played with digital matrix processing.
	NON-MTRX:	Sources are played using the surround back speaker(s). The same signals as those of the surround channel are output from
		the surround back speaker(s).
	OFF:	Sources are played without using the surround back speaker(s).
3	ENTER	Enter the setting.
		The System Setup Menu reappears.

NOTES:

•The SB CH Auto Flag Detect setting screen is displayed when the surround back speaker(s) is/are set to “Large” or “Small” at the “Speaker Configuration” screen.

•The surround back speaker(s) can also be turned on and off with the 6.1/7.1 SURROUND button on the main unit. (See page 45.)

20