Denon AVR-2802/982 operating instructions Multi-source recording/playback

Page 40

ENGLISH

Multi-source recording/playback

[1] Playing one source while recording another (REC OUT mode)

1

Press the REC/MULTI button.

REC /

 

 

MULTI

 

 

(Main unit)

2

With “RECOUT SOURCE” displayed,

FUNCTION

turn the FUNCTION knob to select the

 

 

 

source you wish to record.

The “REC” indicator and the indicator

of the selected source light.

(Main unit)

3

Set the recording mode.

 

 

 

 

• For operating instructions, refer to the manual of the

 

 

component on which you want to record.

 

 

 

4

To cancel, turn the function knob and select “SOURCE”.

 

 

 

 

• When “SOURCE” is selected, the “REC” indicator turns

 

 

off.

 

 

FUNCTION

(Main unit)

2,42

B

1

Display

2

 

 

 

 

 

 

 

REC PHONO CD TUNER DVD VDP TV / DBS

 

 

VCR -1 -2

 

TAPE

 

RECOUT

SOURCE

 

 

 

 

 

 

NOTES:

Recording sources other than digital inputs selected in the REC OUT mode are also output to the multi source audio output jacks.

Digital signals are not output from the REC SOURCE or audio output jacks.

[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)

1

Press the REC/MULTI button.

REC /

 

 

The display switches as follows each

MULTI

 

 

 

time the button is pressed.

 

 

 

(Main unit)

2

With “M-SOURCE SOURCE” displayed,

FUNCTION

turn the FUNCTION knob and select the

 

source you wish to output.

The “MULTI” indicator and the

indicator of the selected source light.

(Main unit)

When the AVR-2802/982 is the REC

 

OUT mode, the source cannot be

MULTI

 

output using the MULTI button on the

 

 

remote control unit.

(Remote control unit)

 

 

 

3

Start playing the source to be output.

 

• For operating instructions, refer to

the manuals of the

 

respective components.

 

 

 

4

To cancel, turn the function knob and select “SOURCE”.

• When “SOURCE” is selected, the “MULTI” indicator turns

off.

FUNCTION

(Main unit)

2,42

B

1

 

SYSTEM

SURROUND

 

TUNING

SETUP

PARAMETER

 

BAND

TITLE

MENU/GUIDE

 

 

 

 

 

CH SELECT

 

 

MODE

ENTER

 

 

 

 

 

 

SELECT

 

 

MEMORY

STATUS

ON SCREEN

 

 

DISPLAY

RETURN

 

USE/LEARN T.TONE MULTI

DVD

2

 

 

SET UP

Display

 

 

2

PHONO CD

TUNER

DVD

VDP TV / DBS

MULTI VCR -1

-2

 

TAPE

M-SOURCE SOURCE

NOTES:

The signals of the source selected in the MULTI mode are also output from the VCR-1, VCR-2/V.AUX and CDR/TAPE recording output terminals.

Digital signals are not output from the multi source audio output jacks.

40

Image 40
Contents AVR-2802/982 English Francais Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting the video decks Connecting a DVD player DVD in jacks Connecting a monitor TV Monitor OUT jackConnecting the antenna terminals AM loop antenna assemblyAn F-type FM antenna cable plug can be connected directly Connection of AM antennasConnecting the external input EXT. in jacks Connecting the Multi Zone jacksSpeaker system connections Connecting banana plugsConnection the speaker terminals Precautions when connecting speakers EnglisPart Names and Functions Front PanelRemote control unit System Call buttonsSetting UP the System System Setup buttonEnter button Cursor buttonsSetting the type of speakers Before setting up the systemDisplay the System Setup Menu Press the Enter button to finalize the setting Frequency mode is sent to the subwooferNone…… Select this when no speakers are installed ParametersSetting the Crossover Frequency and Subwoofer mode Assignment of low frequency signal rangeSubwoofer mode Crossover FrequencySetting Setting the delay time PreparationsSetting the channel level Select Test Tone ModeSelect the mode Adjust the levelVolume Select Auto or ManualSetting the digital in assignment To select the input sourceSetting the on-screen display OSD Auto tuner presetsAfter completing system setup On-screen display signalsUsing the remote control unit Remote Control UnitInserting the batteries Set mode switch 2 to the position for the component to be Be operated with this remote controlOperating Denon audio components OperatedPreset memory Video component Preset memory Audio componentCombinations of Personal System Codes DVD VDP Operating a video component stored in the preset memory VDP, VCR or TVOperate the video component DVD player system buttonsLearning function System call function Using the system call functionSystem call buttons Storing signals Clearing system call settingsOperation Clearing learned remote control signalsBefore operating To select the input source when REC Input mode selection functionPlaying the input source Select the input source to be playedDigital PCM mode Digital DTS modeAnalog mode Input signal displayAdjusting the sound quality tone Playback using the external input EXT. in jacksAfter starting playback Turning the sound off temporarily muting Listening over headphonesChecking the currently playing program source, etc Playing one source while recording another REC OUT mode Multi-source recording/playbackMulti-zone playback with multi-source Surround Before playing with the surround functionDolby Pro Logic indicator lights Select the Dolby Surround Pro Logic II modeFader function Surround parameters q Pro Logic II Mode Dimension ControlPanorama Control Center Width ControlSet the input mode to Auto or DTS Select the Dolby/DTS Surround modeDolby Digital indicator lights When playing Dolby Digital sourcesMenu Select the various parameters Adjust the parameter settingsDialogue Normalization DSP Surround Simulation Surround modes and their featuresPersonal Memory Plus DSP surround simulation Set the parametersWhen turned counterclockwise When turned clockwisePress the Surround Parameter button Tone control setting Cinema MusicSurround modes and parameters Manual tuning Auto tuningListening to the Radio Preset memory Checking the preset stationsLast Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Types of multi-channel signals Additional InformationTypes of sources Movie audio Movie theater sound fieldSurround back speakers Number of surround back speakersSpeaker setting examples When not using surround back speakersSurround Dolby Surround Dolby Digital Dolby Surround AC-3Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS Digital Surround DTS compatible media and playback methodsDTS-ESTMDiscrete DTS-ESTMMatrixDTS Neo6TM surround DTS Neo6 CinemaDVD TV/DBS Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan Page Page Page First name in digital audio Speaker Configuration Delay Time Digital In Assignment