Denon AVR-2802/982 operating instructions Digital In Assignment

Page 73

Use the “Up/Down” arrows to raise/lower the level from each channel, and use the “Left/Right” arrows to select the channel to adjust. Take your time!

•We recommend that once you have completed adjusting the levels, to write down and secure, the levels for every channel. This will help you to reset the system quickly to reference if someone changes the levels, which you know will happen.

•Once finished press the “Enter” key. If you have the system exampled above, go back into Channel Level and reconfigure the speakers for further level adjustments.

.

Digital In Assignment

lThis setting assigns the digital input jacks of the AVR-2802 to the different input sources you have connected to it; i.e. DVD, CD, SAT, MD, CDR etc.

lUse the “Up/Down” arrow keys to select the input source you wish to adjust, then using the “Left/Right” keys to select to digital input you have used for that source.

lMake note that no two sources can share the same digital input.

lFor those input sources that have no digital inputs assigned, select ‘off’.

lWhen complete, press the “Enter” key.

On Screen Display

lThis setting toggles the Display ‘On’ or ‘off’. For convenience sake, leave in the ‘On’ position.

Auto Tuner Presets

lThis setting, when activated, will allow the AVR-2802 to automatically find and store into memory, up to 40 FM radio stations. If a station with poor reception is not stored automatically, you can manually store it into memory.

lBe sure an antenna is attached properly!

lWhen the AVR-2802 has finished searching and locking in stations into memory, the Setup is complete. Simple press the System Setup button to exit out. Enjoy.

4

Image 73

Contents AVR-2802/982 English Francais Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting the video decks Connecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksAM loop antenna assembly Connecting the antenna terminalsAn F-type FM antenna cable plug can be connected directly Connection of AM antennasConnecting the Multi Zone jacks Connecting the external input EXT. in jacksSpeaker system connections Connecting banana plugsConnection the speaker terminals Englis Precautions when connecting speakersFront Panel Part Names and FunctionsSystem Call buttons Remote control unitSystem Setup button Setting UP the SystemEnter button Cursor buttonsSetting the type of speakers Before setting up the systemDisplay the System Setup Menu Frequency mode is sent to the subwoofer Press the Enter button to finalize the settingNone…… Select this when no speakers are installed ParametersAssignment of low frequency signal range Setting the Crossover Frequency and Subwoofer modeSubwoofer mode Crossover FrequencySetting Preparations Setting the delay timeSelect Test Tone Mode Setting the channel levelAdjust the level Select the modeVolume Select Auto or ManualTo select the input source Setting the digital in assignmentAuto tuner presets Setting the on-screen display OSDOn-screen display signals After completing system setupUsing the remote control unit Remote Control UnitInserting the batteries Be operated with this remote control Set mode switch 2 to the position for the component to beOperating Denon audio components OperatedPreset memory Video component Preset memory Audio componentCombinations of Personal System Codes DVD VDP VDP, VCR or TV Operating a video component stored in the preset memoryOperate the video component DVD player system buttonsLearning function System call function Using the system call functionSystem call buttons Clearing system call settings Storing signalsOperation Clearing learned remote control signalsBefore operating Input mode selection function To select the input source when RECPlaying the input source Select the input source to be playedDigital DTS mode Digital PCM modeAnalog mode Input signal displayAdjusting the sound quality tone Playback using the external input EXT. in jacksAfter starting playback Turning the sound off temporarily muting Listening over headphonesChecking the currently playing program source, etc Multi-source recording/playback Playing one source while recording another REC OUT modeMulti-zone playback with multi-source Before playing with the surround function SurroundDolby Pro Logic indicator lights Select the Dolby Surround Pro Logic II modeFader function Dimension Control Surround parameters q Pro Logic II ModePanorama Control Center Width ControlSelect the Dolby/DTS Surround mode Set the input mode to Auto or DTSDolby Digital indicator lights When playing Dolby Digital sourcesMenu Select the various parameters Adjust the parameter settingsDialogue Normalization DSP Surround Simulation Surround modes and their featuresPersonal Memory Plus Set the parameters DSP surround simulationWhen turned counterclockwise When turned clockwisePress the Surround Parameter button Tone control setting Music CinemaSurround modes and parameters Manual tuning Auto tuningListening to the Radio Checking the preset stations Preset memoryLast Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Additional Information Types of multi-channel signalsTypes of sources Movie audio Movie theater sound fieldNumber of surround back speakers Surround back speakersWhen not using surround back speakers Speaker setting examplesDolby Surround Dolby Digital Dolby Surround AC-3 SurroundDolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDTS compatible media and playback methods DTS Digital SurroundDTS-ESTMMatrix DTS-ESTMDiscreteDTS Neo6TM surround DTS Neo6 CinemaDVD TV/DBS Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan Page Page Page First name in digital audio Speaker Configuration Delay Time Digital In Assignment