3.1 Removing and Attaching Base
To remove infant restraint, squeeze handle at back of seat and lift infant restraint from base as shown .
To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.
3.2 Adjusting Handle
1. Press handle adjustment buttons on both sides of handle .
2.Rotate handle until it clicks into any of the 5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C,D: are convenience positions,
Position E: is the sitting position,
NEVER use positions B or C in the vehicle.
BOTH handle adjustment buttons must pop out to lock handle in place .
3.Push and pull on the handle to be sure it is locked firmly in position.
Carrying
AB 
C
D
E Sitting
10