Case C: “I want to listen to a music program from the FM radio station...”
Press FSCENE 4 (or
ESCENE 4) to select “Radio Listening”.
Notes
•To use the “Radio Listening” template, you must tune into the desired radio station in advance. See pages 40 to 42 for tuning information.
•To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change the assigned SCENE template for the SCENE buttons. See page 28 for details.
■After using this unit...
Press 1STANDBY/ON on the front panel to set this unit to the standby mode.
Quick start guide
What do you want to do with this unit?
■Customizing the SCENE templates
• Using various SCENE templates
☞ P. 28
•Creating your original SCENE templates
☞P. 31
■Using various input sources
• Basic controls of this unit
☞ P. 32
• Enjoying FM/AM radio programs
☞ P. 40
•Using your USB portable device with this unit
☞P. 43
INTRODUCTION
This unit is set to the standby mode. To turn on this unit from the standby mode, press 1STANDBY/ON (or
MPOWER). See page 21 for details.
Note
In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.
■Using various sound features
•Using various sound field programs
☞P. 37
•Using the pure direct mode for the high fidelity sound
☞P. 34
•Customizing the sound field programs
☞P. 39
■Adjusting the parameters of this unit
•Automatically optimizing the speaker parameters for your listening room
(AUTO SETUP)
☞P. 24
•Manually adjusting various parameters of this unit
☞P. 46
•Setting the remote control
☞P. 56
•Adjusting the advanced parameters
☞P. 60
■Additional features
Automatically turning off this unit
☞ P. 36
English
9 En