Surround left/right speakers SUR. L/R SP
Choices: NONE, SML, LRG
1 SOUND MENU
A)SPEAKER SET
SUR. L/R SP
NONE >SML LRG
When the surround speakers are large
Select “LRG” (large).
When the surround speakers are small
Select “SML” (small).
When you do not use the surround speakers
Select “NONE” (none). This unit is set to the Virtual CINEMA DSP mode (see page 38).
LFE Bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
1 SOUND MENU
A)SPEAKER SET
LFE/BASS OUT
SWFR FRONT>BOTH
When a subwoofer is connected to this unit and you want to get natural bass sound
Select “SWFR” (subwoofer). The LFE signals as well as the
When a subwoofer is connected to this unit and you want to get rich bass sound
Select “BOTH” (both). The
When you do not use a subwoofer
Select “FRONT” (front). The LFE signals, the low- frequency signals of the front left and right channels, and the
SET MENU
Crossover CROSSOVER
Use this feature to select a crossover frequency of all the speakers set to “SML” (or “SMALL”) or to “NONE” in “SPEAKER SET” (see pages 47 and 48). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to “LRG” (or “LARGE”) in “SPEAKER SET” (see pages 47 and 48).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz
1 SOUND MENU
A)SPEAKER SET
CROSSOVER
FREQ;;;80Hz
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
1 SOUND MENU
A)SPEAKER SET
SUBWOOFER PHASE
>NORMAL REVERSE
•Select “NORMAL” if you do not want to reverse the phase of your subwoofer.
•Select “REVERSE” to reverse the phase of your subwoofer.
OPERATION | ADVANCED |
|
|
English