Yamaha RX-V561 owner manual 62 En

Page 66

Troubleshooting

Problem

Cause

Remedy

See

page

 

 

 

The sound suddenly

The protection circuitry has been activated

Check that the impedance setting is correct.

13

goes off.

because of a short circuit, etc.

 

 

Check that the speaker wires are not touching each

—

 

 

 

 

other and then turn this unit back on.

 

 

 

 

 

 

 

 

The sleep timer has turned off this unit.

Turn on this unit, and play the source again.

—

 

 

 

 

 

The sound is muted.

Press O MUTE or R VOLUME +/– on the remote

36

 

 

control to resume audio output.

 

 

 

 

 

 

 

Sound is heard from

Incorrect cable connections.

Connect the cables properly. If the problem persists,

14-20

the speaker on one

 

the cables may be defective.

 

 

side only.

 

 

 

Incorrect settings in “SP LEVEL”.

Adjust the “SP LEVEL” settings.

34

 

 

 

 

 

Only the center

When playing a monaural source with a

This is not malfunction.

 

speaker outputs

CINEMA DSP program, the source signal

 

 

substantial sound.

is directed to the center channel, and the

 

—

 

front and surround speakers output effect

 

 

 

sounds.

 

 

 

 

 

 

No sound is heard

“CENTER” in “SET MENU” is set to

Set “CENTER” to “SML” or “LRG”.

48

from the center

“NONE”.

 

 

 

speaker.

 

 

 

One of the HiFi DSP programs (except for

Try another sound field program.

37

 

 

5ch Stereo) has been selected.

 

 

 

 

 

 

 

 

No sound is heard

“SUR. L/R SP” in “SPEAKER SET” is

Set “SUR. L/R SP” to “SML” or “LRG”.

49

from the surround

set to “NONE”.

 

 

 

speakers.

 

 

 

This unit is in the “STRAIGHT” mode

Press BSTRAIGHT on the front panel so that

38

 

 

and a monaural source is being played

“STRAIGHT” disappears from the front panel

 

back.

display.

 

 

 

 

 

No sound is heard

“LFE/BASS OUT” in “SPEAKER SET”

Set “LFE/BASS OUT” to “SWFR” or “BOTH”.

 

from the subwoofer.

is set to “FRONT” when a Dolby Digital

 

49

 

or DTS signal is being played.

 

 

 

 

 

 

 

“LFE/BASS OUT” in “SPEAKER SET”

Set “LFE/BASS OUT” to “SWFR” or “BOTH”.

 

 

is set to “SWFR” or “FRONT” when a 2-

 

49

 

channel source is being played.

 

 

 

 

 

 

 

The source does not contain low-

This is not malfunction.

—

 

frequency bass signals.

 

 

 

 

 

 

 

 

62 En

Page 65 Page 67
Image 66
Page 65 Page 67
Contents RX-V561 Important safety instructions FCC Information for US customers Example of Antenna GroundingFor Canadian Customers Serial NoContents Features We Want You Listening For a LifetimeCheck that you received all of the following parts Remote controlGetting started AM loop antennaSet up your speakers Quick start guideEnjoy DVD playback Center and surround speakers Connect your DVD player and other components For further connections Connect the FM and AM antennas to this unitSee page 20 for the details Press Fscene Using the other Scene buttonsCheck the type of the connected speakers Press Fscene 2 or Scene 2 to select Disc ListeningWhat do you want to do with this unit? 10 En ConnectionsRear panel AC OutletsPlacing speakers 11 EnRight Left Center Speaker Subwoofer Center speaker Connecting speakers12 En Subwoofer Right Left Front speakers aConnecting to the Speakers terminals Setting the speaker impedanceBefore connecting to the Speakers Terminal 13 EnAudio jacks Information on jacks and cable plugs14 En Video jacksHdmi jack and cable plug Information on Hdmi15 En Hdmi cable plugConnecting video components 16 EnConnect the video components as follows Hdmi connection Connecting to the HDMI, Component Video or S Video jacks17 En Video monitor Cable TV or Satellite tunerVideo connection 18 EnComponent Video connection Video monitor DVD playerConnecting to the Multi CH Input jacks Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder 19 EnUsing the Video AUX jacks on the front panel Connecting the FM and AM antennas20 En Set this unit to the standby mode Connecting the power cableTurning on and off the power 21 EnFront panel display 22 EnInfrared window Using the remote control23 En 30ºOptimizing the speaker setting for your listening room Using Auto Setup24 En 25 En Press G Enter to confirm your selection 26 EnPress G Enter to return to the Autoresult display Top SET Menu display appears in the OSDIf an error screen appears 27 EnIf Warning appears 28 En Selecting the Scene templatesSelecting the desired Scene template Selected Scene template is assigned to the button29 En Which Scene template would you like to select?Preset Scene templates descriptions 30 En31 En Customizing the preset Scene TemplatesCreating your original Scene templates Renaming the Scene templatesBasic operations Quick guide to contentsPlayback 32 En33 En Using the Zone B featureAdditional operations Selecting the front speaker set34 En Adjusting the tonal qualityAdjusting speaker levels during Playback Enjoying pure hi-fi stereo soundPress D AMP and then press Q Menu on the remote control Selecting the night listening modeDisplaying signal information 35 En36 En Using your headphonesUsing the sleep timer Playing video sources BackgroundSound field program descriptions Category Program FeaturesSound field programs 37 En38 En Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode PRO Logic39 En Editing sound fields parametersManual tuning FM/AM tuningAutomatic tuning Press 5PRESET/TUNING l / h once to begin automatic tuningAutomatic preset tuning Manual preset tuning41 En See Selecting preset stations on this Selecting preset stationsExchanging preset station Press and hold 2PRESET/TUNING for more than 3 seconds43 En Using a USB memory device or a USB portable audio playerPlayback operation Supported USB devicesPress G Enter to play the selected file 44 EnFunction of the play information display Playback icon All all repeat, 1 single repeat iconsRecording 45 EnAuto setup Auto Setup Manual setup Manual Setup46 En Using SET Menu Signal information Signal Info47 En Speaker settings Aspeaker SET 48 En49 En Speaker distance CSP Distance 50 EnSpeaker level BSP Level Unit UnitCenter speaker equalizer Dcenter GEQ Audio settings Gaudio SET51 En Low-frequency effect level Elfe Level52 En Input assignment53 En Decoder select modeDTS decoder prioritize setting RenameMulti channel input setup Display settings Adisplay SET54 En USB playback styles Eusb Play Style 55 EnParameter initialization DPARAM. INI Repeat RepeatControlling the input source Components in the Scene mode Remote control featuresUsing remote control on the Scene feature 56 EnControlling this unit Controlling a TV Controlling this unit, a TV, or other components57 En AMP58 En Controlling other componentsInput Component Manufacturer Default Setting remote control codesRemote control code default settings 59 En60 En Advanced setupFactory presets Preset Speaker impedance SP IMP61 En TroubleshootingProblem Cause Remedy See General62 En Problem Cause Remedy 63 En64 En Before Auto SetupError message Cause Remedy See TunerDuring Auto Setup After Auto Setup65 En 66 En Status message Cause RemedyAdvanced setup menu appears in the front panel display Remote controlResetting the system Press Bstraight repeatedly to select ResetGlossary 68 EnAudio information Video information 69 EnSound field program information MP3Specifications 70 EnIndex 71 EnNumerics 72 En Headphone73 En SpeakerFront panel/Face avant Remote control/Boîtier de télécommande List of remote control codes Liste des codes de commande IiiInternational Manesth DVD/VCR Combo TV/DVD/VCR ComboTV/VCR Combo VCRDVD DVR DVD/LD ComboDVD Recorder LD PlayerRX-V561 Menu Volume
Top Page Image Contents