Yamaha RX-V561 owner manual Specifications, 70 En

Page 74

Specifications

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

1 kHz, 0.9% THD, 8 Ω

100 W

• Maximum Power for Front, Center, Surround (JEITA)

1kHz, 10% THD, 8 Ω

135 W

• Dynamic Power

 

(IHF, 8/6/4/2 Ω)

110/130/160/180 W

• Dynamic Headroom

 

8 Ω

0.41 dB

• Maximum Input Signal

 

CD, etc. Effect On, 1 kHz, 0.5% THD

2.0 V or more

• Frequency Response

 

CD, etc. to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

(1 kHz, 50 W, Front L/R, 8 Ω )

0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

CD (200 mV) to Front L/R, Effect Off

98 dB or more

CD (250 mV) to Front L/R, Effect Off

100 dB or more

• Residual Noise (IHF-A Network)

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

CD, etc. (5.1 kΩ terminated) to Front L/R

...................................................................

60 dB/45 dB or more

• Tone Control (Front L/R)

 

BASS Boost/Cut

±10 dB/100 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

• Phones Output

400 mV/470 Ω

• Input Sensitivity/Input.................................................................Impedance

200 mV/47 kΩ

CD, etc.

MULTI CH INPUT

200 mV/47 kΩ

• Output Level/Output Impedance

200 mV/1.2 kΩ

AUDIO OUT (REC)

SUBWOOFER OUTPUT

4 V/1.2 kΩ

•Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP: SMALL/SML)

......................................................................................

12 dB/oct.

L.P.F. (Subwoofer)

24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray back)

NTSC

• Signal Level

1 Vp-p/75 Ω

Composite

 

S-video

1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)

Component

1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)

• Signal to Noise Ratio

50 dB or more

• Maximum Input Level

1.5 Vp-p or more

• Frequency Response (MONITOR OUT)

 

Component Signal

5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

87.5 to 107.9 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

 

Mono

2.8 µV (20.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

73 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.5%/0.5%

• Antenna Input (unbalanced)

75 Ω

AM SECTION

• Tuning Range ......................................................... 530 to 1710 kHz

GENERAL

• Power Supply

120 V AC, 60 Hz

• Power Consumption

240 W/320 VA

• Standby Power Consumption

0.8 W or less

• AC Outlets

2 (Total 100 W maximum)

• Dimensions (W x H x D)

435 x 151 x 318 mm

 

(17-1/8” x 5-15/16” x 12-1/2”)

• Weight

8.1 kg (17 lbs 14 oz)

* Specifications are subject to change without notice.

70 En

Page 73 Page 75
Image 74
Page 73 Page 75
Contents RX-V561 Important safety instructions FCC Information for US customers Example of Antenna GroundingFor Canadian Customers Serial NoContents Features We Want You Listening For a LifetimeCheck that you received all of the following parts Remote controlGetting started AM loop antennaEnjoy DVD playback Set up your speakersQuick start guide Center and surround speakers Connect your DVD player and other components See page 20 for the details For further connectionsConnect the FM and AM antennas to this unit Press Fscene Using the other Scene buttonsCheck the type of the connected speakers Press Fscene 2 or Scene 2 to select Disc ListeningWhat do you want to do with this unit? 10 En ConnectionsRear panel AC OutletsPlacing speakers 11 EnRight Left Center Speaker Subwoofer Center speaker Connecting speakers12 En Subwoofer Right Left Front speakers aConnecting to the Speakers terminals Setting the speaker impedanceBefore connecting to the Speakers Terminal 13 EnAudio jacks Information on jacks and cable plugs14 En Video jacksHdmi jack and cable plug Information on Hdmi15 En Hdmi cable plugConnect the video components as follows Connecting video components16 En Hdmi connection Connecting to the HDMI, Component Video or S Video jacks17 En Video monitor Cable TV or Satellite tunerVideo connection 18 EnComponent Video connection Video monitor DVD playerConnecting to the Multi CH Input jacks Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder 19 En20 En Using the Video AUX jacks on the front panelConnecting the FM and AM antennas Set this unit to the standby mode Connecting the power cableTurning on and off the power 21 EnFront panel display 22 EnInfrared window Using the remote control23 En 30º24 En Optimizing the speaker setting for your listening roomUsing Auto Setup 25 En Press G Enter to confirm your selection 26 EnPress G Enter to return to the Autoresult display Top SET Menu display appears in the OSDIf Warning appears If an error screen appears27 En 28 En Selecting the Scene templatesSelecting the desired Scene template Selected Scene template is assigned to the button29 En Which Scene template would you like to select?Preset Scene templates descriptions 30 En31 En Customizing the preset Scene TemplatesCreating your original Scene templates Renaming the Scene templatesBasic operations Quick guide to contentsPlayback 32 En33 En Using the Zone B featureAdditional operations Selecting the front speaker set34 En Adjusting the tonal qualityAdjusting speaker levels during Playback Enjoying pure hi-fi stereo soundPress D AMP and then press Q Menu on the remote control Selecting the night listening modeDisplaying signal information 35 En36 En Using your headphonesUsing the sleep timer Playing video sources BackgroundSound field program descriptions Category Program FeaturesSound field programs 37 En38 En Enjoying 2-channel sources using Standard decodersEnjoying unprocessed input sources Straight decoding mode PRO Logic39 En Editing sound fields parametersManual tuning FM/AM tuningAutomatic tuning Press 5PRESET/TUNING l / h once to begin automatic tuning41 En Automatic preset tuningManual preset tuning See Selecting preset stations on this Selecting preset stationsExchanging preset station Press and hold 2PRESET/TUNING for more than 3 seconds43 En Using a USB memory device or a USB portable audio playerPlayback operation Supported USB devicesPress G Enter to play the selected file 44 EnFunction of the play information display Playback icon All all repeat, 1 single repeat iconsRecording 45 En46 En Auto setup Auto SetupManual setup Manual Setup 47 En Using SET MenuSignal information Signal Info Speaker settings Aspeaker SET 48 En49 En Speaker distance CSP Distance 50 EnSpeaker level BSP Level Unit UnitCenter speaker equalizer Dcenter GEQ Audio settings Gaudio SET51 En Low-frequency effect level Elfe Level52 En Input assignment53 En Decoder select modeDTS decoder prioritize setting Rename54 En Multi channel input setupDisplay settings Adisplay SET USB playback styles Eusb Play Style 55 EnParameter initialization DPARAM. INI Repeat RepeatControlling the input source Components in the Scene mode Remote control featuresUsing remote control on the Scene feature 56 EnControlling this unit Controlling a TV Controlling this unit, a TV, or other components57 En AMP58 En Controlling other componentsInput Component Manufacturer Default Setting remote control codesRemote control code default settings 59 En60 En Advanced setupFactory presets Preset Speaker impedance SP IMP61 En TroubleshootingProblem Cause Remedy See General62 En Problem Cause Remedy 63 En64 En Before Auto SetupError message Cause Remedy See Tuner65 En During Auto SetupAfter Auto Setup 66 En Status message Cause RemedyAdvanced setup menu appears in the front panel display Remote controlResetting the system Press Bstraight repeatedly to select ResetAudio information Glossary68 En Video information 69 EnSound field program information MP3Specifications 70 EnNumerics Index71 En 72 En Headphone73 En SpeakerFront panel/Face avant Remote control/Boîtier de télécommande List of remote control codes Liste des codes de commande IiiInternational Manesth DVD/VCR Combo TV/DVD/VCR ComboTV/VCR Combo VCRDVD DVR DVD/LD ComboDVD Recorder LD PlayerRX-V561 Menu Volume
Top Page Image Contents